GE Monogram ZCG3100, ZCG3500, ZCG3300 Installation in a corner Level the opening

Page 7

Installation in a corner

Level the opening

Installation

Built-In Compactors

If compactor is to be located in or near a corner of base cabinets, a minimum of 2" clearance from the corner is recommended. This is necessary to prevent adjacent cabinet door handles from interfering with the compactor drawer.

Do not install flooring material after compactor is placed under the counter. This will limit ability to service.

If there is an appreciable difference in floor height between where the compactor is to be installed and the floor of the kitchen, add runners of the minimum height necessary to make floor level.

7

Image 7
Contents Installation Instructions Mise EN Garde Design Information Thick Wood Panel Installation PreparationThick Wood Panel with custom handle Option #3Installation Installation in a corner Level the opening Determine toekick depth Adjust movable base Positioning the compactor backstop Setting the height Attach tip-over brackets Step Optional custom toekick Procedure B Thick wood panel Procedure a Reverse color panelProcedure C Thick wood panel with supplied handle Procedure C Procedure D Thick wood panel with custom handle Procedure D Pub. No Dwg. No D4700P196 93042835C