Vanguard Heating SBVRBN Sbvrbn and Sbvrbp Cast Iron Stove and Burner System, Safety Information

Page 2

® SBVRBN AND SBVRBP

CAST IRON STOVE AND BURNER SYSTEM

SAFETY

INFORMATION

WARNINGS

IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, oper- ate, or service this stove and burner system. Improper use of this stove and burner system can cause serious injury or death from burns, fire, explosions, electrical shock, and carbon monoxide poisoning.

DANGER: Carbon monoxide poisoning may lead to death!

This stove with burner system is a vented product. If this unit is not properly installed by a qualified service person with glass door properly seated and sealed, gas combustion products can spill into your home.

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, or nausea. If you have these signs, the burner system may not have been installed properly. Get fresh air at once! Have stove with burner system inspected and serviced by a qualified service person. Some people are more affected by carbon monoxide than others. These include pregnant women, people with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes.

Propane/LP gas and natural gas are both odorless. An odor-making agent is added to each of these gases. The odor helps you detect a gas leak. However, the odor added to these gases can fade. Gas may be present even though no odor exists.

Make certain you read and understand all warnings. Keep this manual for reference. It is your guide to safe and proper operation of this stove with B-vent burner system.

WARNING: Any change to this stove or burner system or its controls can be dangerous.

1.This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases unless a certified kit is used.

2.For propane/LP burner system, do not place propane/LP supply tank(s) inside any structure. Locate propane/LP sup- ply tank(s) outdoors. To prevent perfor- mance problems, do not use propane/LP fuel tank of less than 100 lbs. capacity.

3.If you smell gas

shut off gas supply

do not try to light any appliance

do not touch any electrical switch; do not use any phone in your building

immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

if you cannot reach you gas supplier, call the fire department.

4.Never install the stove

in a recreational vehicle

where curtains, furniture, clothing, or other flammable objects are less than 42" from the front, top, or sides of the stove with burner system

in high traffic areas

in windy or drafty areas

5.This stove reaches high temperatures. Keep children and adults away from hot surfaces to avoid burns or clothing igni- tion. Stove will remain hot for a time after shut-down. Allow surfaces to cool before touching.

6.Carefully supervise young children when they are in the room with stove.

7.Do not modify this stove or burner sys- tem under any circumstances. Any parts removed for servicing must be replaced prior to operating burner system.

8.Turn burner system off and let cool be- fore servicing, installing, or repairing. Only a qualified service person should install, service, or repair this stove or burner system. Have stove and burner system inspected annually by a quali- fied service person.

9.You must keep control compartments, burners, and circulating air passages clean. More frequent cleaning may be needed due to excessive lint and dust from carpeting, bedding material, pet hair, etc. Turn off the gas valve and pilot light be- fore cleaning stove or burner system.

10.Have venting system inspected annu- ally by a qualified service person. If needed, have venting system cleaned or repaired. See Cleaning and Mainte- nance, page 22.

11.Keep the area around your stove clear of combustible materials, gasoline, and other flammable vapor and liquids. Do not run burner system where these are used or stored. Do not place items such as clothing or decorations on or around stove.

12.Do not use this stove to cook food or burn paper or other objects.

13.Never place anything on top of stove.

14.Do not use any solid fuels (wood, coal, paper, cardboard, etc.) in this burner system. Use only the gas type indicated on burner system nameplate.

15.This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electri- cal Code, ANS/NFPA 70, or the Cana- dian Electrical Code, CSA C22.1.

16.Do not obstruct the flow of combus- tion and ventilation air in any way. Pro- vide adequate clearances around air openings into the combustion chamber along with adequate accessibility clear- ance for servicing and proper operation.

17.Do not install stove with burner system directly on carpeting, vinyl tile, or any combustible material other than wood. The stove must set on a metal or wood panel extending the full width and depth of the stove.

18.Do not use stove or burner system if any part has been exposed to or under water. Immediately call a qualified ser- vice person to arrange for replacement of the unit.

19.Do not operate burner system if any log is broken.

20.Do not use a blower insert, heat ex- changer insert, or other accessory not approved for use with this stove.

21.Do not operate burner system with glass door removed, cracked, or broken.

22.This heater must be properly connected to a vent system. This heater is equipped with a vent safety shutoff system.

For more information, visit www.desatech.com

2

106707

Image 2
Contents For Your Safety For Your Safety What to do if YOU Smell GASSafety Information Sbvrbn and Sbvrbp Cast Iron Stove and Burner SystemLocal Codes Product FeaturesProduct Identification OperationPRE-INSTALLATION Preparation Location and Space RequirementsCast Iron Stove and B-VENT Burner System Assembly Stove Body AssemblyAttaching Stove Legs Installing B-VENT Burner System Into Stove Body Installing Optional Blower AccessoryCast Iron Stove and DIRECT-VENT Burner System Assembly Installing Rear CoverType B-VENT Installation Listed B-0 or Greater Venting InstallationInstallation Precautions Checking Vent Capacity Installation of Listed B-1 VentInstalling Vent System in a Chase Relining Systems High Altitude InstallationChimneys Troubleshooting Venting Problems Cast Iron Stove and B-VENT Burner System InstallationInstallation Items Needed Tion. Purchase the CSA/AGA design-certiPressure Testing Burner System Gas Connections Connecting STOVE/ Burner System to GAS SupplyPressure Testing Gas Supply Piping System Checking GAS ConnectionsInstalling Optional Wall Mount Switch GWMS2 Installing Optional Wall Mounted Thermostat GWMT1Installing Remote Receiver Thermostat Base Terminal W and RInstalling 9-Volt Battery in Hand- Held Remote Control Unit REMOVING/REPLACING Glass DoorInstalling LOGS, Lava ROCK, and Glowing Embers Installing Log NoOperating Stove with B-VENT Burner System For Your Safety Read Before LightingManual Lighting Procedure Lighting InstructionsGhrc Series Operation Optional RemoteThermostat Control Operation Ghrcta Series OperationInspecting Burners Operating Optional Blower AccessoryPilot Assembly Operating Optional GWMT1 Wall Mounted ThermostatPilot and Burners Cleaning and MaintenanceGlass Door LogsTroubleshooting Observed Problem Possible CauseObserved Problem Possible Cause Remedy Gas leak. See Warning statement Wiring Diagram Replacement PartsTechnical Service Service HintsSpecifications AccessoriesIllustrated Parts Breakdown Sbvrbn SbvrbpParts List KEY Part Number Description QTYAmity SCIVFC* Series PSCIVFC* Series Indicates Color Suffix DesignationKEY Part Description QTY Warranty Information

SBVRBP, SBVRBN specifications

Vanguard Heating has made significant strides in the heating industry with its innovative product line, including the SBVRBN and SBVRBP models. These heating solutions are designed for both residential and commercial applications, prioritizing efficiency, durability, and advanced technology.

The SBVRBN model stands out with its high performance output, making it ideal for areas needing rapid heating. This model utilizes state-of-the-art heating elements that ensure even warmth distribution, thereby eliminating cold spots and enhancing comfort. Additionally, its compact design allows for installation in various spaces without consuming excessive floor area.

One of the standout features of the SBVRBN model is its smart technology integration. Equipped with Wi-Fi connectivity, users can easily control the temperature remotely via a smartphone app, enabling them to preheat spaces before arriving home. This feature not only enhances convenience but also contributes to energy savings, as users can adjust heating schedules according to their lifestyle.

The SBVRBP variant focuses on energy efficiency, meeting rigorous standards that result in lower energy bills. It is equipped with advanced thermostatic controls that constantly monitor and adjust the heating output based on the ambient temperature. This technology ensures that the heating system operates only when necessary, reducing unnecessary energy consumption while maintaining comfort.

Both the SBVRBN and SBVRBP models feature durable construction with high-quality materials that are designed to withstand the test of time. Corrosion-resistant components and advanced insulation techniques contribute to longevity and consistent performance. Furthermore, their quiet operation is a significant benefit, making them suitable for environments where noise is a concern, such as offices or bedrooms.

Safety is a paramount consideration in Vanguard Heating's designs. Both models are equipped with multiple safety features, including overheating protection and automatic shut-off mechanisms. These enhancements provide peace of mind for users, knowing that their heating solutions operate safely and reliably.

In summary, Vanguard Heating’s SBVRBN and SBVRBP models represent a perfect blend of innovation, efficiency, and reliability. With smart technology, energy efficiency, durable construction, and safety features, these heating solutions are designed to meet the diverse needs of modern users, making them a compelling choice in the heating market.