Keurig B155 owner manual Troubleshooting, Situation Solution

Page 18

SECTION 4 Troubleshooting

Situation Solution

Brewer does not Plug Brewer into an independent outlet. have power Check to be sure that it is plugged in securely.

Plug into a different outlet.

Reset your home’s circuit breaker if necessary.

Make sure that the Power Switch has been turned on and LCD Display is illuminated.

Brewer will not brew After placing the K-Cup®in the K-Cup Holder, make sure the Handle is pushed down securely and the LCD Control Center reads “READY TO BREW” with the BREW Button flashing, then press the Left, Right or BREW Button.

If the LCD Control Center indicates “ADD WATER”, add water to the Water Reservoir or make sure the Water Reservoir is seated properly in its base.

If the LCD Control Center indicates “ADD WATER” even after refilling, contact Customer Service at 1.866.901.BREW (2739).

The Exit Needle may be clogged (refer to page 16).

Chlorine or mineral Consider using bottled water, filtered water taste in coffee or the Keruig® Water Filter Starter Kit

(available at www.keurig.com).

Situation Solution

Brewing a partial cup The Exit Needle may be clogged (refer to page 16).

Clean the K-Cup Holder Assembly if necessary and rinse under faucet (refer to pages 15-16).

The Water Reservoir may have been removed during brewing. Replace the Water Reservoir and perform a water brew without a K-Cup.

“De-Scale” the Brewer (refer to pages 16-17 ).

If you have repeated the de-scale procedure on your Brewer two times and it is still only brewing a partial cup, contact Customer Service at 1.866.901.BREW (2739).

The time is not The time will not be displayed on the LCD displayed on the LCD unless you have set it. To set the clock, follow the

Message Center procedure on page 12.

If power is interrupted to the Brewer, you will need to set the clock again using the procedure on page 12.

Brewer shuts Check to make sure that the Auto Off timer

off or turns on and/or On/Off time features have not been set. To automatically do this, press the MENU Button below “MENU”

and scroll through the programming options. “OFF” should be displayed for Auto Off timer and On/Off. If “OFF” is not displayed, follow directions on pages 13-14 to reset.

If any problems persist, contact Customer Service at 1.866.901.BREW (2739)

18

Image 18
Contents Using Your Brewer Important Safeguards Safe Operation & Use Do not assume the next user will do thisTable of Contents Unpacking Instructions Set-upHelpful Hints Please see pages 16 and 17 for instructionsFeatures Professional Series Model B155 Brewer Cup Assembly Drip Tray Housing Drip Tray PlateLCD Screen Power Cord Drip Tray Base Brew Button Setting Up Your Brewer Set-Up & First Brewfig Ready to Brew Your First Cup Place a mug on the drip tray and selectNext brew cycle Stopping the Brew Process Adding WaterBrewing Hot Water Purging the BrewerMenu Controls & Indicators Menu ModeMenu Key Navigation Auto OFFSetting the Clock Programming Brew Temperature 188-198º FProgramming Your Brew Size Programming On/Off FeaturesThat the brew size is disabled From the Menu Mode, pressLanguage Settings Setting Contact ScreenCleaning & Maintenance Cleaning External PartsCleaning the Water Reservoir & Water Reservoir Lid De-Scaling Your BrewerBack onto the K-Cup Holder Storage ServiceDe-Scaling Instructions Drain the water from the Internal HotTroubleshooting Situation SolutionWarranty Limited One Year WarrantyKeurig, Incorporated Règles DE Sécurité Importantes Fonctionnement et utilisation sans dangerTable DES Matières Programmation des fonctions de mise en marche etRéglages Conseils utilesDéballage de la cafetière Caractéristiques Cafetière B155 Série professionnelle Couvercle du réservoir d’eau Réservoir d’eau’assemblage du support à K-Cup ’égouttage Cuvette Placez une tasse de 296 ml 10 oz sur le Préparation et première infusionPréparation de votre cafetière Infusion de nettoyage. Remarque Ce cycle seInfusion de votre première tasse Annulation d’une infusion Ajout d’eauEau chaude Vidange de la cafetièreMenu de commandes et voyants Mode MenuNavigation dans les menus LangueRéglage de l’horloge Programmation des formats d’infusion « Formats »Automatiquement deux heures après la Réglage des coordonnéesRéglage de la langue « Désactivé » apparaît à l’écran. Appuyez sur « OK »Nettoyage et entretien Nettoyage des pièces externesNettoyage de l’assemblage du support à K-Cup Nettoyage du réservoir d’eau et de son couvercle DétartrageProcédure de détartrage RéparationEntreposage Problème Solution DépannageSi l’écran ACL indique Garantie Garantie limitée d’un anPage