Keurig B155 owner manual Brewing Hot Water, Purging the Brewer

Brewing Hot Water

Your Brewer is able to produce hot water for making hot cocoa from a packet, or for use in cooking, etc. Simply follow the instructions on page 7, “Ready To Brew Your First Cup” without adding a K-Cup.

NOTE: After brewing a hot cocoa K-Cup, we recommend running a hot water brew cycle without a K-Cup.

Purging the Brewer

If your Brewer has not been used for more than one week, you should purge the water from the internal water tank.

1.If there is water in the Water Reservoir, remove the Lid, then lift the Water Reservoir straight up and away from Brewer. Discard water, rinse and refill with water. Place the Water Reservoir back on the Brewer and replace the Lid. (If there is no water in the Water Reservoir, simply refill.)

2.Be sure the Brewer is turned ‘ON’. Raise and lower the Handle on the Brewer without inserting a K-Cup.

3.The LCD Display will be in its idle state (fig.4).

fig. 10

Select

Brew Size

4 OZ.	8 OZ.
6 OZ.	10 OZ.

4.Place a large mug on the drip tray and select Large Mug (10 oz. serving) brew size from the Select Brew Size Menu (fig.10).

5.Discard water.

6.Repeat steps 2 - 5 two more times to completely purge water from the Internal Hot Water Tank.

9