Jura Capresso 13623 manual Permanent settings in programming mode, Programming mode

Page 26

4 Permanent settings in programming mode

4 Permanent settings in programming mode

JWARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking.

T In the event of scalding, rinse affected area with cold water an seek medical attention.

T Keep children AWAY.

Possible settings in	Press the P button to enter programming mode. You can navigate
programming mode	through the program items and permanently save the required set-
	tings simply by turning the Rotary Switch and using the multi-func-
	tion buttons. The following settings can be made:

Program item	Sub-item	Explanation

‘Maintenance status	‘Clean’,	T Start the required maintenance program
(1/5)’	‘Change the filter’,	here.
	‘Descale’ (only if filter is
	not activated),
	‘Rinse the milk system’,
	‘Rinse the coffee system’,
	‘Clean the milk system’

‘Product settings	‘Expert mode’,	T Select your settings for specialty coffees,
(2/5)’	‘Set consistency of grind’	milk and hot water.
		T Adjust the consistency of grind for both
		grinders to the coffee beans used.

‘Machine settings	‘Maintenance settings’	T Adjust the water hardness or activate the
(3/5)’	(filter, water hardness,	filter.
	switch-on rinse, milk	T Change the settings for the switch-on rinse
	system rinsing),	and milk system rinse.
	‘Time / date’,	T Set the time after which the GIGA should
	‘Timer’,	switch off automatically.
	‘Save energy’,	T Select an energy-saving mode.
	‘Units’,	T Select the unit for the amount of water.
	‘Factory setting’	T Reset the machine or the permanently set
		values of all products to the factory settings.

26

Image 26

Contents Giga 5 Instructions for Use Your Giga Control elements Preparing and using for the first timePermanent settings in programming mode PreparationSymbol description MaintenanceImportant Safeguards Special power cord set instructions Never do or you will void your warranty protection Important Safeguards Control elements Sliding catch Button programmingBack of the machine FingerJura on the Internet Preparing and using for the first timeSetting up the machine Filling the water tankMachine Press the On/Off button to switch the Giga on First-time use‘English’ Press the ‘Quick installation’ buttonPress the ‘Standard installation’ button ‘First-time use’‘Insert filter.’ / ‘Press the Rotary Switch.’ Time Determining the water hardness’ Switch.’‘Water hardness’ Hardness Connecting milkDetermining the water Etc. options for PreparationCoffee, latte macchiato Preparation‘Prepare’ button Preparation at the touchA button Press the ‘Latte macchiato’ button Preparation usingProduct selector Ground coffee Barista recipes at a GlanceButton.’ appears Permanently settingHold the ‘Coffee’ button down until ‘Enough coffee? Press ‘Please select product’ appears on the display‘Maintenance status 1/5’ Press the ‘Café à la carte’ buttonHot water Daily operation Switching on Daily maintenance‘Press the Rotary Switch.’ Switching off Permanent settings in programming mode Programming modeProduct settings Milk 0 sec. 120 sec Press the ‘Amount of milk foam’ button Maintenance settings ‘Save No’ Setting the waterEnergy-saving mode ‘Save Level 1’‘Save Level 2’ Mode Units’Time and date Press the ‘Save energy’ button. ‘Save energy’Timer On at the power switchAutomatic switch-off Units‘Empty system’ ‘All products’‘Machine’ Press the ‘All products’ buttonPress the ‘Choose language’ button. ‘Choose language’ Display settingsLanguage Recipes BackgroundDeactivating barista Press the ‘Colour scheme’ button. ‘Colour scheme’‘Machine settings 4/5’ Press the ‘Product counter’ buttonMaintenance Press the ‘Rinse the coffee system’ button Rinsing the milk system Cleaning the milk systemUse only original Jura Cappuccino Cleaner Press the ‘Start’ button Press the ‘Clean the milk system’ buttonKeep children Away Avoid contact with skin and eyes Dismantling and rinsing the dual spout Maintenance Press the ‘Maintenance settings’ button Insert the milk pipe into the dual spout‘Filter’ / ‘Filter rinsing complete.’ ‘Change filter.’ / ‘Press the Rotary Switch.’Changing the filter Pressure Cleaning the machineYou to clean it ‘Change the filter’ / ‘Filter rinsing complete.’Press the ‘Clean’ button Press the ‘Start’ button ‘Clean’ / ‘Cleaning complete.’Press the P button. ‘Maintenance status 1/5’ ‘Pour descaling agent into water tank.’ ‘Fill water tank.’Cleaning the bean container ‘Descale’ / ‘Descaling complete.’Rinse out the water tank thoroughly Display messages ‘Spout is not ‘Service cover is‘Change filter.’ ‘Not enoughTroubleshooting ‘Fill bean container.’Switch. Contact customer support Disposal Transport and environmentally friendly disposalSystem Press the ‘Empty system’ buttonEnergy consumption Approx Wh Technical data‘Save energy’ / ‘Save No’ ‘Save energy’ / ‘Save Level 1’Bean container with aroma preservation cover Rinsing the milk system 40 Cleaning Bean container MachineIndex Jura Splash guard 8 Spout Mode 26 Setting upStandard installation 12 Switching off Intentionally blank Intentionally blank Intentionally blank Canada Faema Customer Service Phone MailJura contact details / Legal information Info@juracanada.ca