Jura Capresso 13623 manual Cleaning the machine, Pressure, You to clean it

Page 46

5 Maintenance

 

 

T Insert the filter cartridge into the water tank, exerting slight

 

 

 

 

pressure.

 

 

T Close the filter holder. It will click into place audibly.

 

 

T Fill the water tank with fresh, cold water and reinsert the

 

 

tank.

 

 

k T Press the Rotary Switch.

 

 

‘Filter is being rinsed.’, the filter is rinsed. Rinsing of the filter

 

 

 

 

stops automatically. ‘Empty drip tray.’ appears on the dis-

 

 

play.

 

 

T Empty the drip tray and coffee grounds container and put

 

 

them back into the machine.

 

 

‘Change the filter’ / ‘Filter rinsing complete.’

 

 

The machine heats up. ‘Please select product:’ appears on

 

 

the display.

Cleaning the machine

After 220 preparations or 80 switch-on rinses, the GIGA will prompt

 

 

you to clean it.

JWARNING Non-recommended (e.g. liquid) cleaning agents may contain sub- stances that could damage the machine or leave residues.

T Use only original JURA cleaning tablets. These are specially formulated for your machine.

JWARNING Harmful and irritating cleaning agent. Harmful if swallowed. Irritat- ing to eyes and skin.

T Keep children AWAY.

T Avoid contact with skin and eyes.

T Avoid generation of dust. Do not inhale dust.

T After contact with skin, wash immediately with plenty of water. In case of skin irritation, seek medical advice.

T After eye contact, immediately flush eyes with plenty of water and seek medical advice.

T If swallowed, rinse mouth immediately and drink large quan- tities of water. Do not induce vomiting. Seek medical advice immediately and show label.

EThe cleaning program lasts approximately 20 minutes.

EDo not interrupt the cleaning program. The quality of cleaning will be impaired if you do so.

46

Image 46
Contents Giga 5 Instructions for Use Your Giga Control elements Preparing and using for the first timePermanent settings in programming mode PreparationSymbol description MaintenanceImportant Safeguards Special power cord set instructions Never do or you will void your warranty protection Important Safeguards Control elements Sliding catch Button programmingBack of the machine FingerJura on the Internet Preparing and using for the first timeSetting up the machine Filling the water tankMachine Press the On/Off button to switch the Giga on First-time use‘English’ Press the ‘Quick installation’ buttonPress the ‘Standard installation’ button ‘First-time use’‘Insert filter.’ / ‘Press the Rotary Switch.’ ‘Water hardness’ Switch.’Time Determining the water hardness’ Determining the water Connecting milkHardness Etc. options for PreparationCoffee, latte macchiato PreparationA button Preparation at the touch‘Prepare’ button Product selector Preparation usingPress the ‘Latte macchiato’ button Ground coffee Barista recipes at a GlanceButton.’ appears Permanently settingHold the ‘Coffee’ button down until ‘Enough coffee? Press ‘Please select product’ appears on the display‘Maintenance status 1/5’ Press the ‘Café à la carte’ buttonHot water ‘Press the Rotary Switch.’ Switching on Daily maintenanceDaily operation Switching off Permanent settings in programming mode Programming modeProduct settings Milk 0 sec. 120 sec Press the ‘Amount of milk foam’ button Maintenance settings ‘Save No’ Setting the waterEnergy-saving mode ‘Save Level 1’‘Save Level 2’ Mode Units’Time and date Press the ‘Save energy’ button. ‘Save energy’Timer On at the power switchAutomatic switch-off Units‘Empty system’ ‘All products’‘Machine’ Press the ‘All products’ buttonLanguage Display settingsPress the ‘Choose language’ button. ‘Choose language’ Recipes BackgroundDeactivating barista Press the ‘Colour scheme’ button. ‘Colour scheme’‘Machine settings 4/5’ Press the ‘Product counter’ buttonMaintenance Use only original Jura Cappuccino Cleaner Rinsing the milk system Cleaning the milk systemPress the ‘Rinse the coffee system’ button Keep children Away Avoid contact with skin and eyes Press the ‘Clean the milk system’ buttonPress the ‘Start’ button Dismantling and rinsing the dual spout Maintenance Press the ‘Maintenance settings’ button Insert the milk pipe into the dual spoutChanging the filter ‘Change filter.’ / ‘Press the Rotary Switch.’‘Filter’ / ‘Filter rinsing complete.’ Pressure Cleaning the machineYou to clean it ‘Change the filter’ / ‘Filter rinsing complete.’Press the ‘Clean’ button Press the ‘Start’ button ‘Clean’ / ‘Cleaning complete.’Press the P button. ‘Maintenance status 1/5’ ‘Pour descaling agent into water tank.’ ‘Fill water tank.’Cleaning the bean container ‘Descale’ / ‘Descaling complete.’Rinse out the water tank thoroughly Display messages ‘Spout is not ‘Service cover is‘Change filter.’ ‘Not enoughTroubleshooting ‘Fill bean container.’Switch. Contact customer support Disposal Transport and environmentally friendly disposalSystem Press the ‘Empty system’ buttonEnergy consumption Approx Wh Technical data‘Save energy’ / ‘Save No’ ‘Save energy’ / ‘Save Level 1’Index Rinsing the milk system 40 Cleaning Bean container MachineBean container with aroma preservation cover Jura Standard installation 12 Switching off Mode 26 Setting upSplash guard 8 Spout Intentionally blank Intentionally blank Intentionally blank Canada Faema Customer Service Phone MailJura contact details / Legal information Info@juracanada.ca