Jura Capresso 13623 manual Changing the filter, ‘Filter’ / ‘Filter rinsing complete.’

Page 45

 

 

5 Maintenance

 

 

T Remove the filter cartridge extension from the Welcome

 

 

Pack.

 

 

T Fit the filter extension on top of a CLEARYL Blue filter car-

 

 

tridge.

 

 

T Remove and empty the water tank.

 

 

T Open the filter holder and insert the filter cartridge into the

 

 

 

 

water tank, exerting slight pressure.

 

 

T Close the filter holder. It will click into place audibly.

 

 

T Fill the water tank with fresh, cold water and reinsert the

 

 

tank.

 

 

k T Press the Rotary Switch.

 

 

‘Filter is being rinsed.’, the filter is rinsed. Rinsing of the filter

 

 

 

 

stops automatically. ‘Empty drip tray.’ appears on the dis-

 

 

play.

 

 

T Empty the drip tray and coffee grounds container and put

 

 

them back into the machine.

 

 

‘Filter’ / ‘Filter rinsing complete.’

 

 

The machine heats up. ‘Please select product:’ appears on

 

 

the display. Your GIGA is once more ready for use.

Changing the filter

E After 2000 oz (60 liters) of water have flowed through or after

 

 

three months, the filter will cease to work. Your GIGA will auto-

 

 

matically prompt you to change the filter.

 

 

E If the CLEARYL Blue filter cartridge is not activated in program-

 

 

ming mode, you will not be prompted to change the filter.

Example: Proceed as follows to change the filter when prompted to do so.

Precondition: ‘Change the filter’ and the c symbol are displayed.

OT Press the P button.

‘Maintenance status (1/5)’

TPress the ‘Change the filter’ button.

TPress the ‘Start’ button.

TPress the ‘Start’ button again.

‘Change filter.’ / ‘Press the Rotary Switch.’

TRemove and empty the water tank.

TOpen the filter holder and remove the old CLEARYL Blue fil- ter cartridge and filter extension.

TFit the filter extension on top of a new filter cartridge.

45

Image 45
Contents Giga 5 Instructions for Use Permanent settings in programming mode Control elements Preparing and using for the first timeYour Giga PreparationMaintenance Symbol descriptionImportant Safeguards Special power cord set instructions Never do or you will void your warranty protection Important Safeguards Control elements Back of the machine Button programmingSliding catch FingerSetting up the machine Preparing and using for the first timeJura on the Internet Filling the water tankFirst-time use Machine Press the On/Off button to switch the Giga onPress the ‘Standard installation’ button Press the ‘Quick installation’ button‘English’ ‘First-time use’‘Insert filter.’ / ‘Press the Rotary Switch.’ Switch.’ ‘Water hardness’Time Determining the water hardness’ Connecting milk Determining the waterHardness Coffee, latte macchiato PreparationEtc. options for PreparationPreparation at the touch A button‘Prepare’ button Preparation using Product selectorPress the ‘Latte macchiato’ button Ground coffee Glance Barista recipes at aHold the ‘Coffee’ button down until ‘Enough coffee? Press Permanently settingButton.’ appears ‘Please select product’ appears on the displayPress the ‘Café à la carte’ button ‘Maintenance status 1/5’Hot water Switching on Daily maintenance ‘Press the Rotary Switch.’Daily operation Switching off Programming mode Permanent settings in programming modeProduct settings Milk 0 sec. 120 sec Press the ‘Amount of milk foam’ button Maintenance settings Energy-saving mode Setting the water‘Save No’ ‘Save Level 1’Time and date Mode Units’‘Save Level 2’ Press the ‘Save energy’ button. ‘Save energy’On at the power switch TimerUnits Automatic switch-off‘Machine’ ‘All products’‘Empty system’ Press the ‘All products’ buttonDisplay settings LanguagePress the ‘Choose language’ button. ‘Choose language’ Deactivating barista BackgroundRecipes Press the ‘Colour scheme’ button. ‘Colour scheme’Press the ‘Product counter’ button ‘Machine settings 4/5’Maintenance Rinsing the milk system Cleaning the milk system Use only original Jura Cappuccino CleanerPress the ‘Rinse the coffee system’ button Press the ‘Clean the milk system’ button Keep children Away Avoid contact with skin and eyesPress the ‘Start’ button Dismantling and rinsing the dual spout Maintenance Insert the milk pipe into the dual spout Press the ‘Maintenance settings’ button‘Change filter.’ / ‘Press the Rotary Switch.’ Changing the filter‘Filter’ / ‘Filter rinsing complete.’ You to clean it Cleaning the machinePressure ‘Change the filter’ / ‘Filter rinsing complete.’‘Clean’ / ‘Cleaning complete.’ Press the ‘Clean’ button Press the ‘Start’ buttonPress the P button. ‘Maintenance status 1/5’ ‘Fill water tank.’ ‘Pour descaling agent into water tank.’‘Descale’ / ‘Descaling complete.’ Cleaning the bean containerRinse out the water tank thoroughly Display messages ‘Change filter.’ ‘Service cover is‘Spout is not ‘Not enough‘Fill bean container.’ TroubleshootingSwitch. Contact customer support System Transport and environmentally friendly disposalDisposal Press the ‘Empty system’ button‘Save energy’ / ‘Save No’ Technical dataEnergy consumption Approx Wh ‘Save energy’ / ‘Save Level 1’Rinsing the milk system 40 Cleaning Bean container Machine IndexBean container with aroma preservation cover Jura Mode 26 Setting up Standard installation 12 Switching offSplash guard 8 Spout Intentionally blank Intentionally blank Intentionally blank Jura contact details / Legal information Customer Service Phone MailCanada Faema Info@juracanada.ca