Jura Capresso 13709 Cleaning the Impressa, Impressa calcified, General cleaning instructions

Page 21

16.6 Cleaning the IMPRESSA

After 200 draw-off operations or after 80 rinsing operations, the IMPRESSA must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam. However, we recommend that you should clean the machine (Chapter 17) within the next few days.

 CLEAN MACHINE / MACHINE READY

16.7 IMPRESSA calcified

During operation, the machine will calcify. The degree of scaling depends on the hardness of the water in your region. The machine will inform you when de-scaling is required. You can still draw off coffee or hot water/steam. However, we recommend that you should de-scale the machine (Chapter 18) within the next few days.

 MACHINE CALCIFIED / MACHINE READY

16.8 General cleaning instructions

Never use scratching objects, pan cleaners, cleaning sponges or caustic chemicals to clean the machine.

Wipe off the case on the inside and outside using a soft, moist cloth.

Clean the replaceable hot water nozzle after each use.

After heating milk, draw off some hot water, to clean the inside of the 2-stage frothing jet, too.

Disassemble the 2-stage frothing jet for proper cleaning (Fig. 6).

The water tank should be rinsed daily and refilled with fresh water.

If the water tank shows signs of scaling, remove the scaling using a commercial de-scaling agent. Take out the water tank (Fig. 4).

Remove the Claris plus filter cartridge, if installed, before de-scaling the water tank.

16.9 Emptying the system

Precondition: IMPRESSA switched off

This operation is required to protect the IMPRESSA against frost damage during transports.

Place a container under the replaceable hot water nozzle (16).

 OPEN TAP

Press the Rotary Switch (1)

 EMPTYING

 CLOSE TAP

The IMPRESSA is switched off.

17. Cleaning

E

Your IMPRESSA features an integrated cleaning program. The cleaning operation will take some 15 min.

JURA cleaning tablets which are specially designed for the cleaning program of your IMPRESSA are available at your authorized dealer. Please note that machine defects or residues in the water cannot be excluded if you use inappro- priate cleaning agents.

Once started, the de-scaling operation must not be inter- rupted!

After each cleaning operation the filler funnel for pre-ground coffee should be cleaned (11).

21

Image 21
Contents Impressa F70/F7/F707 Jura Impressa Page Control elements 15/16Contents Precautions Safety information 1.1 WarningIntroduction Preparing the Impressa 2.1 Check supply voltagePower switch Adjusting the grinding gearFill coffee beans First use Filling System  Heating  Press Maint Adjusting the water hardness Rinsing  Ready  FilterInstallation of Claris plus filter cartridges Installing the filterReplacing the filter Changing the filter without display request Adjusting the water quantity for coffeeRinsing the Impressa Rinsing the Impressa without display requestMaking 2 cups of coffee Making 1 cup of coffeeDrawing off hot water Drawing off pre-ground coffeeSteam Drawing off steamMaking cappuccino with the Easy-Cappuccino Frother ImpressaMaintenance menu Switching off the ImpressaProgramming 15.1 Programming the filterProgramming the temperature Programming the aroma Intensive or StandardProgramming the time Programming the automatic switch-off time Programming the automatic switch-on time Time Machine onProgramming the language Cup counterProgramming Display 24H/AM/PM Exit programming modeProgramming the display for ML/OZ  DisplayMaintenance 16.1 Filling in water Emptying the coffee grounds containerDrip tray missing General cleaning instructions Cleaning the ImpressaCleaning Impressa calcifiedDe-scaling Cleaning without display request Open TAP Agent in Tank  Agent Tank DE-SCALING  Close TAP  DE-SCALING  Empty TrayDecalcifying without display request DisposalTips for perfect coffee Messages Problem Cause Remedy Legal information Technical Data