Jura Capresso 13709 manual Cleaning without display request, De-scaling

 READY CLEAN

Touch the symbol (7).

 EMPTY TRAY

Empty the tray (20).

 NO

TRAY

Insert the tray (20) again.

Remove the drip grate (19).

Put a container (1 l, Fig. 11) under the adjustable coffee spout (17).

 PRESS

MAINT.

Touch the symbol (7).

 CLEANING

 FILL TABLET

Fill in the tablet (see Fig. 14)

 PRESS

MAINT.

Touch the symbol (7).

 CLEANING

 EMPTY TRAY

 NO

TRAY

 READY

Wipe coffee powder tank with a dry cloth after the cleaning program has finished.

The cleaning operation was completed successfully.

17.1 Cleaning without display request

Press the Rotary Switch (1) until

FILTER – / appears.

Turn the Rotary Switch (1) until

MAINTENANCE appears.

Press the Rotary Switch (1) to confirm.

 RINSE

Turn the Rotary Switch (1) until

CLEAN appears.

Press the Rotary Switch (1) again to confirm.

 EMPTY TRAY

The program “Clean” is now active. Now proceed as described

in Chapter 17 from EMPTY TRAY onwards.

18. De-scaling

Your IMPRESSA features an integrated de-scaling program. The cleaning operation will take some 40 min.

JURA de-scaling tablets which are specially designed for the de-scaling program of your IMPRESSA are available at your authorized dealer. Please note that machine defects or residues in the water cannot be excluded if you use inappro- priate de-scaling agents.

If the IMPRESSA needs de-scaling, the corresponding mes- sage is displayed.

You can still draw off coffee or hot water/steam and start the de-scaling program later.

Before starting the de-scaling program, the machine must be switched off. Once started, the de-scaling operation must not be interrupted.

22