Jura Capresso 13709 Maintenance 16.1 Filling in water, Emptying the coffee grounds container

Page 20

16.Maintenance 16.1 Filling in water

 FILL WATER

If this information is displayed, drawing off products is no longer possible. Refill water as described in Chapter 2.3.

 READY

The water tank should be rinsed daily and refilled with fresh water. Only fill in fresh, cold water. Never fill in milk, mineral water or other liquids.

16.2 Emptying the coffee grounds container

 EMPTY GROUNDS

If this message appears on the display, you can no longer draw off coffee. You must empty the coffee grounds con- tainer (18) first (Fig. 13).

Carefully take out the drip tray (20), it is filled with water.

 NO

TRAY

Insert the empty and clean trip tray (20) again.

 READY

The red water level indicator appears when the drip tray (20) is full.

16.3 Drip tray missing

 NO TRAY

If this information is displayed, the drip tray (20) is not installed properly or was not installed at all.

Insert the drip tray (20).

 READY

16.4 Fill coffee beans

 FILL BEANS

Refill beans as described in Chapter 2.4.

The message REFILL BEANS will disappear after you draw off your next cup of coffee.

We recommend that you clean the bean tank regularly before refilling beans, using a dry cloth. Before cleaning the tank, switch off the IMPRESSA.

16.5 Replacing the filter

After drawing off 50 litres, the filter cartridge will be used up. A message requesting you to replace the filter will appear on the display.

Refer to Chapter 5.2 «Replacing the filter».

20

Image 20
Contents Impressa F70/F7/F707 Jura Impressa Page 15/16 Control elementsContents Safety information 1.1 Warning PrecautionsIntroduction Preparing the Impressa 2.1 Check supply voltageAdjusting the grinding gear Power switchFill coffee beans First useAdjusting the water hardness  Filling System  Heating  Press Maint Rinsing  Ready  FilterReplacing the filter Installation of Claris plus filter cartridgesInstalling the filter Adjusting the water quantity for coffee Changing the filter without display requestRinsing the Impressa Rinsing the Impressa without display requestMaking 1 cup of coffee Making 2 cups of coffeeDrawing off pre-ground coffee Drawing off hot waterDrawing off steam SteamImpressa Making cappuccino with the Easy-Cappuccino FrotherSwitching off the Impressa Maintenance menuProgramming 15.1 Programming the filterProgramming the time Programming the temperatureProgramming the aroma Intensive or Standard Programming the automatic switch-on time Programming the automatic switch-off time Time Machine onCup counter Programming the languageExit programming mode Programming Display 24H/AM/PMProgramming the display for ML/OZ  DisplayDrip tray missing Maintenance 16.1 Filling in waterEmptying the coffee grounds container Cleaning the Impressa General cleaning instructionsCleaning Impressa calcifiedCleaning without display request De-scaling Agent Tank  Open TAP Agent in Tank DE-SCALING  Close TAP  DE-SCALING  Empty TrayTips for perfect coffee Decalcifying without display requestDisposal Messages Problem Cause Remedy Technical Data Legal information