Jura Capresso 13709 manual Changing the filter without display request, Rinsing the Impressa

Place a sufficiently large jug (approx 1 litre) under the replace- able hot water nozzle (16) and open the steam/hot water tap (14) (Fig. 12).

 RINSING

FILTER

 CLOSE TAP

Open the steam / hot water draw-off tap (14) (Fig. 12).

 HEATING UP

 READY

5.3 Changing the filter without display request

Press the Rotary Switch (1) until

FILTER  appears.

Press the Rotary Switch (1) to confirm.

 YES 

Press the Rotary Switch (1) again to confirm.

 INSERT/OPEN TAP

The program “Change filter” is now active. Now proceed as

described in Chapter 5.2 from REPLACE/OPEN TAP onwards.

6. Rinsing the IMPRESSA

When the IMPRESSA is switched off and has cooled down, a rinsing operation is started when the machine is switched on again. When the machine is switched off, a rinsing operation is started automatically.

Touch the symbol (3).

 HEATING UP

 PRESS MAINT.

Touch the symbol (7).

 RINSING

 READY

6.1 Rinsing the IMPRESSA without display request

Press the Rotary Switch (1) until

FILTER – / appears.

Turn the Rotary Switch (1) until

MAINTENANCE appears.

Press the Rotary Switch (1) to confirm.

 RINSE

Press the Rotary Switch (1) again to confirm.

 RINSING

 READY

7. Adjusting the water quantity for coffee

The indicated value in ML is a reference value and may deviate from the actual value

You can change/stop the water quantity during the draw-off operation, too. Turn the rotary switch (1) until the required ML value is displayed.

You can adjust the water quantity in steps of 5 ML using the Rotary Switch (1).

 READY

Turn the Rotary Switch (1) until the required water quantity is displayed.

For example, 120 ML

10