Jura Capresso 13709 manual Problem Cause Remedy

Page 26
22. Problems

Problem

Cause

Remedy

 

 

 

Very loud noise coming from the

Foreign body in grinding gear

Drawing off pre-ground coffee still possible

grinding gear

 

Have IMPRESSA checked by JURA Service

 

 

 

 

 

Too little froth when

2-stage frothing jet blocked

clean 2-stage frothing jet

frothing milk

 

 

 

2-stage frothing jet in wrong position

Draw off steam (Chapter 12)

 

 

 

Coffee only drips

Grinding degree too fine

Coarser grinding gear adjustment

from the coffee spout

 

 

 

Pre-ground coffee too fine

Use a coarser pre-ground coffee

 

 

 

High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time. If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.

26

Image 26
Contents Impressa F70/F7/F707 Jura Impressa Page 15/16 Control elementsContents Introduction Safety information 1.1 WarningPrecautions Preparing the Impressa 2.1 Check supply voltageFill coffee beans Adjusting the grinding gearPower switch First use Rinsing  Ready Adjusting the water hardness Filling System  Heating  Press Maint  FilterReplacing the filter Installation of Claris plus filter cartridgesInstalling the filter Rinsing the Impressa Adjusting the water quantity for coffeeChanging the filter without display request Rinsing the Impressa without display requestMaking 1 cup of coffee Making 2 cups of coffeeDrawing off pre-ground coffee Drawing off hot waterDrawing off steam SteamImpressa Making cappuccino with the Easy-Cappuccino FrotherProgramming Switching off the ImpressaMaintenance menu 15.1 Programming the filterProgramming the time Programming the temperatureProgramming the aroma Intensive or Standard  Time Programming the automatic switch-on timeProgramming the automatic switch-off time Machine onCup counter Programming the languageProgramming the display for ML/OZ Exit programming modeProgramming Display 24H/AM/PM  DisplayDrip tray missing Maintenance 16.1 Filling in waterEmptying the coffee grounds container Cleaning Cleaning the ImpressaGeneral cleaning instructions Impressa calcifiedCleaning without display request De-scaling DE-SCALING  Close TAP  Agent Tank Open TAP Agent in Tank  DE-SCALING  Empty TrayTips for perfect coffee Decalcifying without display requestDisposal Messages Problem Cause Remedy Technical Data Legal information