Jura Capresso 13709 manual Drawing off steam, Steam

Page 13

 CLOSE TAP

Close the steam / hot water draw-off tap (14).

 READY

Before CLOSE TAP water may still escape the system.

12. Drawing off steam

To ensure perfect operation, clean the 2-stage frothing jet (15) regularly. Screw the nozzle off as described in. Hold the nozzle at the top and at the bottom end and screw it apart (Fig. 16). Thoroughly rinse the 3 parts under running water.

Make sure the nozzle has engaged properly. If the nozzle is clogged with dried milk or has not been attached properly, it might suddenly come off during operation.

Install the 2-stage frothing jet (Fig. 6). This is included in your Welcome Pack. Do not replace the replaceable steam/hot water nozzle (15) directly after drawing off steam, because the nozzle is hot after the draw-off operation.

Steam can be used for heating liquids and frothing milk for cappuccino. Make sure that the 2-stage frothing jet (15) is pushed upwards when liquids are heated. To froth liquids, push the 2-stage frothing jet downwards, turning it slightly.

During frothing some water will escape the system before the actual frothing process. This does not affect the result, e.g. when frothing milk.

At the start of the steam draw-off operation there can be splashing. The frothing jet becomes hot. Avoid direct contact with the skin!



READY

 

 

 Place a cup under the 2-stage frothing jet (15) and immerse it in

 

 

the milk to be frothed or the liquid to be heated.

 

 To draw off steam, open the steam/hot water draw-off tap (14)

 

 

(Fig. 12).

 

 

 The illuminated ring (2) is active.

 



STEAM

 

 

 You can adjust the steam draw-off time individually by turning

 

 

the rotary switch (1) until the required SEC are displayed.

 

 For example,

35 SEC

 

 If you do not change the steam draw-off time settings using the

 

 

rotary switch (1), the machine will use the settings last adjusted

 

 During the steam draw-off operation, the message STEAM is

 

 

displayed

 

 

 When the steam quantity is reached, the message CLOSE TAP is

E

 

displayed

 



Close the steam / hot water draw-off tap (14).

 

 READY

Before CLOSE TAP, steam may still escape the system.

13.Drawing off steam with the Professional-Cappuccino Frother or the Easy-Cappuccino Frother

The Professional-Cappuccino Frother and the Easy-Cappuc- cino Frother are optional. Please contact your authorized dealer.

13

Image 13
Contents Impressa F70/F7/F707 Jura Impressa Page Control elements 15/16Contents Precautions Safety information 1.1 WarningIntroduction Preparing the Impressa 2.1 Check supply voltagePower switch Adjusting the grinding gearFill coffee beans First use Filling System  Heating  Press Maint Adjusting the water hardness Rinsing  Ready  FilterInstalling the filter Installation of Claris plus filter cartridgesReplacing the filter Changing the filter without display request Adjusting the water quantity for coffeeRinsing the Impressa Rinsing the Impressa without display requestMaking 2 cups of coffee Making 1 cup of coffeeDrawing off hot water Drawing off pre-ground coffeeSteam Drawing off steamMaking cappuccino with the Easy-Cappuccino Frother ImpressaMaintenance menu Switching off the ImpressaProgramming 15.1 Programming the filterProgramming the aroma Intensive or Standard Programming the temperatureProgramming the time Programming the automatic switch-off time Programming the automatic switch-on time Time Machine onProgramming the language Cup counterProgramming Display 24H/AM/PM Exit programming modeProgramming the display for ML/OZ  DisplayEmptying the coffee grounds container Maintenance 16.1 Filling in waterDrip tray missing General cleaning instructions Cleaning the ImpressaCleaning Impressa calcifiedDe-scaling Cleaning without display request Open TAP Agent in Tank  Agent Tank DE-SCALING  Close TAP  DE-SCALING  Empty TrayDisposal Decalcifying without display requestTips for perfect coffee Messages Problem Cause Remedy Legal information Technical Data