Initial Setup Instructions
Chassis Information Screen
"Procedure
To enter or display chassis configuration information:
1.Choose Chassis Info from the Hotwire Chassis Main Menu. The following table describes the information you should enter on the Chassis Information screen.
Field
Input
Description
Chassis Name | 16 alphanumeric characters | Name for the equipment |
|
|
|
Chassis Contact | 32 alphanumeric characters | Name and phone number of |
|
| individual responsible for the |
|
| equipment |
|
|
|
Chassis Location | 16 alphanumeric characters | Physical location of the |
|
| equipment |
|
|
|
Bay Number | 16 alphanumeric characters | Floor and/or bay number of the |
|
| equipment |
|
|
|
Chassis Number | 16 alphanumeric characters | Chassis serial number (located |
|
| on the lower right side of |
|
| chassis) |
|
|
|
2.When you have made the appropriate changes to the screen, a message
Configuration has been modified. Save (yes/no)? appears. Enter yes to save changes and press Return to go back to the Hotwire Chassis Main Menu.
What's Next?
Now you are ready to configure your Hotwire DSLAM. Refer to Chapter 4, Configuring the Hotwire DSLAM, for instructions on how to configure the mandatory minimum configurations and Chapter 5, 8310 MVL and 8510 DSL Card Configuration, for additional configuration instructions when customizing your application.
After you have configured your system, you can monitor and troubleshoot potential problems on the system. Refer to Chapter 6, Monitoring the Hotwire DSLAM, and Chapter 7, Diagnostics and Troubleshooting, for more information.
May 1998 |