Configuring the Hotwire DSLAM
The following tables list the basic steps you need to configure the MCC card and the DSL and MVL cards.
For the Management Domain, perform task . . .
On the . . .
See . . .
1. | Clear NVRAM if the Who Am I | MCC Card | Clear NVRAM, page |
| screen does not appear. |
|
|
|
|
|
|
2. | Set the IP address and Subnet | MCC Card | Setting the IP Address and Subnet |
| Mask. |
| Mask, page |
|
|
|
|
3. | Configure time and date. | MCC Card | Setting Time and Date, page |
|
|
|
|
4. | Create SNMP Community | MCC Card | Creating SNMP Community |
| Strings and Authentication |
| Strings and Enabling |
| Failure Trap. |
| Authentication Failure Traps, |
|
|
| page |
|
|
|
|
5. | Create default route. | MCC Card | Creating the Default Route, |
|
|
| page |
|
|
|
|
For each Access Node, perform task . . .
On the . . .
See . . .
1. | Configure VLAN(s) on DSL or | DSL or MVL | Configuring VLAN(s) on a DSL or |
| MVL cards. | Card | MVL Card, page |
|
|
|
|
2. | Select the Active VLAN on each | DSL or MVL | Selecting the Active VLAN on each |
| DSL or MVL port. | Card | DSL or MVL Port, page |
|
|
|
|
3. | Configure a default next hop | DSL or MVL | Configuring the Next Hop Router |
| router for each VLAN. | Card | for each VLAN, page |
|
|
|
|
4. | Configure static users. | DSL or MVL | Configuring Static Users, |
|
| Card | page |
|
|
|
|
May 1998 |