Paradyne 8310 MVL DSL Configuration Service Node Screens, Service Node Options, SN Configuration

Page 54

8310 MVL and 8510 DSL Card Configuration

DSL Configuration Service Node Screens

Use the SN Configuration screen to configure endpoint Service Node information.

"Procedure

1.Follow this menu sequence:

Configuration → SN Configuration (A-F).

2.The SN Configuration menu appears. Enter the desired value on the selected screen and field as shown in Table 5-5and press Return.

Table 5-5. Service Node Options

SN Configuration	A-F

Displays endpoint information for the 5620 DSL or 6310 MVL Service Node.

Port # ± Enter the DSL or MVL port number (1 to 4).

SN Type ± Model number of SN connected to the DSL port. For Model 8510, the SN is 5620. For Model 8310, the SN is 6310. (This field is read-only.)

System Name ± 16 alphanumeric characters. Enter the name assigned to the SN.

System Contact ± 32 alphanumeric characters. Enter the name or number of the person responsible for the SN.

System Location ± 16 alphanumeric characters. Enter the location of the SN.

Model Num ± Model number of card. (This field is read-only.)

Serial Num ± Serial number of card. (This field is read-only.)

Firmware Rev ± Version of firmware. (This field is read-only.)

Hardware Rev ± Version of hardware.(This field is read-only.)

CAP Rev ± (For Model 8510 only.) Version of CAP chipset. (This field is read-only.)

MVL Rev ± (For Model 8310 only.) Version of MVL chipset. (This field is read-only.)

Reset SN? ± Yes/No. Enter yes to reset the SN and begin a selftest.

NOTE: Entering yes in the Reset SN field will temporarily disrupt the data path on the specified DSL port while the SN resets.

SN Selftest Results ± Pass/Fail. This field displays the results of the SN selftest, when completed.

5-12

May 1998

8000-A2-GB26-00

Image 54

Contents HOTWIRE Dslam for 8310 MVL and 8510 DSL Cards Copyright 1998 Paradyne Corporation All rights reserved Contents Initial Setup Instructions Traps Contents About This Guide Document Purpose and Intended AudienceDocument Summary Section DescriptionProduct-Related Documents Document Number Document TitleViii Hotwire Dslam System Description What is the Hotwire DSLAM?Central Office CO OptionalHotwire Dslam Components Hotwire Dslam chassis There are two types of chassis98-15973 Features One Management Communications Controller MCC cardLevels of Access Configuring the DSL CardsSoftware Functionality Troubleshooting and Diagnostics Monitoring the DSL CardsHotwire Dslam System Description Hotwire Menus and Screens OverviewComponents of a Hotwire Menu Menu and Screen FormatsComponents of a Hotwire Screen Commonly Used Navigation Keys Keys DefinitionHotwire Menu Hierarchy Hotwire Chassis Main MenuHotwire Chassis Hotwire DSL Hotwire ± MCC MenuHotwire ± DSL Menu DiagnosticsCard Status Interfaces ConfigurationPorts Download CodeLogging In to the System Reviewing the Levels of Access User Login ScreenCard Selection Screen Position Display Description Exiting From the System Manually Logging OffAutomatically Logging Off Initial Setup Instructions Accessing the System for the First TimeInitial Setup Instructions Additional Setup Instructions Whats Next? Chassis Information ScreenField Input Description Configuring the Hotwire Dslam Configuring the MCC Card and DSL CardsFor each Access Node, perform task See For the Management Domain, perform task SeeSetting the IP Address and Subnet Mask Clear NvramSetting Time and Date Creating the Default Route Configuration → Snmp → Communities/Traps A-F-BConfiguring VLANs on a DSL or MVL Card Configuring the Active Vlan on each DSL or MVL PortConfiguring the Next Hop Router for each Vlan Configuring Static UsersConfiguring the Hotwire Dslam MVL and 8510 DSL Card Configuration DSL Configuration Card Status ScreensTime/Date Card Status Options 1Card Info Card Information Nvram ClearCard Status Options 2 Card Status Options 3 Apply DownloadDSL Configuration Ports Screens Ports Options 1Ethernet Port Ports Options 2 DSL Ports DSL Parameters 8510 CardDSL Configuration Interfaces Screens Ports Options 3DSL Ports DSL Parameters 8310 Card General General Interfaces DSL Configuration Users ScreensInterfaces Options Control Control InterfacesDSL Configuration Bridge Screens Card Vlan Card Bridge Options 1General Port Vlan PortARP Parameters and Add ARP Entry E a and B Bridge Options 2Client Vlan Client Parameters aDSL Configuration Service Node Screens Service Node OptionsSN Configuration Monitoring the Hotwire Dslam DSL Monitoring Card Status ScreensLogin History Card Status OptionsCard Info General Card Information DSL Monitoring Physical Layer Screens Physical Layer Options 1Active List Active Ports List Physical Layer Options 2 Ethernet Stats Ethernet StatisticsPhysical Layer Options 3 EtherHDLC Stats EtherHDLC StatisticsInitialized EtherHDLC Ports ± s1c, s1d, s1e, or s1f Physical Layer Options 4 DSL Link Perf DSL Link Performance SummaryDSL Perf Stats DSL Performance Stats DSL Error Stats Physical Layer Options 5DSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens Monitor Interfaces Options Active List Active Interfaces ListStatus Interface Status DSL Network Protocol Screens Monitoring → Network Protocol B-DNetwork Protocol Options 1 Socket StatisticsUDP Statistics Network Protocol Options 2 TCP Statistics TCP Data StatisticsNetwork Protocol Options 3 TCP Connection StatisticsIP Statistics Network Protocol Options 4 Icmp Statistics Icmp Packet StatisticsSnmp Statistics Snmp Authentication Statistics Network Protocol Options 5DSL Bridge Screens Bridge Table MAC TableClient User to Display ± Entry numberARP Table DSL SN Information Screen Service Node Options Diagnostics and Troubleshooting Diagnostic ScreensApplications Screens Selftest Diagnostics OptionsAlarms Card Alarms DSL Packet Echo TestTroubleshooting R U U U XChecking Alarms Major Alarms 1 Failure Type ActionMajor Alarms 2 Failure Type Action Ethernet port 1. Check cable connections to the DslamFailure Minor Alarms 1 Failure Type Action MarginThreshold Minor Alarms 2 Failure Type Action Link DownNetwork Problems Slow PerformanceExcessive Collisions Cannot Upload Configurations to a Unix Server No Response at StartupDiagnostics and Troubleshooting Download Code and Apply Tftp Server Configuration Download CodeFully Functional System Deferred Apply Apply Download Download Only System Automatic Immediate ApplyDownload Code and Apply Download Traps DSL Card TrapsEvent Trap Class Comment Trap # ± MIB Traps Event Trap Class Comment Trap # ± MIB Traps Glossary Ethernet address E1aEthernet FilterPots Splitter Service NodePacket Proxy ARPTraceRoute TelnetTerminal emulation UpstreamIndex IN-1IN-2