Traps
B
Traps are configured via a Telnet or terminal session. The addition or removal of a card or another hardware component within the Hotwire DSLAM system causes a trap to be generated. These traps indicate a configuration change notification (CCN) of a card (a hardware replacement or a software upgrade).
DSL Card Traps
The DSL card sends the following traps.
Event | Trap Class | Comment | Trap # ± MIB * |
|
|
|
|
Device failure | major | AN's operating | 15±sys |
|
| software has |
|
|
| detected an internal |
|
|
| device failure. |
|
|
|
|
|
Selftest failure | minor | Sent if any portion of | 16±sys |
|
| the AN's |
|
|
| restart/selftest fails. |
|
|
|
|
|
CCN (Configuration | warning | Configuration | 7±sys |
Change Notice) |
| change caused by |
|
|
| one the following |
|
|
| events: |
|
|
| H software |
|
|
| download |
|
|
| H configuration |
|
|
| download |
|
|
| H card removed |
|
|
| (objective) |
|
|
|
|
|
* MII = MIB ll, ent = Entity MIB, dsl = hotDSL Enterprise MIB, sys = hotSys Enterprise MIB, dhcp = DHCP Enterprise MIB, diag = hot_diag.mib
May 1998 |