Paradyne 8510 DSL, 8310 MVL manual Additional Setup Instructions

Page 33

Initial Setup Instructions

3.Do one of the following at the (nnn.nnn.nnn.nnn): prompt:

ÐTo accept the subnet mask, press Return or,

ÐTo enter a different subnet mask, enter a new subnet mask and press Return.

The system highlights the OK to restart?: prompt.

4.Type y at the yes/no: prompt to restart the card or n to decline the restart.

If you type y, the card restarts. The system displays the Hotwire Chassis Main Menu.

NOTE:

At this point, the MCC card can accept a Telnet session for remote configuration.

If an MCC powers up with no router ID (for new cards or after a clear NVRAM command has been executed), the MCC will perform a BOOTP out the Ethernet interface to acquire an IP address and subnet mask. This IP address and subnet mask is kept in non-volatile storage if you want to enter or override this information on either the Who Am I screen or the MCC Ethernet IP Address screen.

Additional Setup Instructions

This section describes additional setup instructions you should perform. On the Chassis Information screen, you can enter pertinent chassis information, such as the chassis name, name of the person responsible for the system, and the physical location of the chassis.

8000-A2-GB26-00

May 1998

3-3

Image 33

Contents HOTWIRE Dslam for 8310 MVL and 8510 DSL Cards Copyright 1998 Paradyne Corporation All rights reserved Contents Initial Setup Instructions Traps Contents Document Purpose and Intended Audience About This GuideSection Description Document SummaryDocument Number Document Title Product-Related DocumentsViii What is the Hotwire DSLAM? Hotwire Dslam System DescriptionOptional Central Office COHotwire Dslam chassis There are two types of chassis Hotwire Dslam Components98-15973 One Management Communications Controller MCC card FeaturesLevels of Access Configuring the DSL CardsSoftware Functionality Monitoring the DSL Cards Troubleshooting and DiagnosticsHotwire Dslam System Description Overview Hotwire Menus and ScreensMenu and Screen Formats Components of a Hotwire MenuComponents of a Hotwire Screen Keys Definition Commonly Used Navigation KeysHotwire Menu Hierarchy Hotwire Chassis Main MenuHotwire Chassis Hotwire ± DSL Menu Hotwire ± MCC MenuHotwire DSL DiagnosticsPorts ConfigurationCard Status Interfaces Download CodeLogging In to the System User Login Screen Reviewing the Levels of AccessCard Selection Screen Position Display Description Exiting From the System Manually Logging OffAutomatically Logging Off Accessing the System for the First Time Initial Setup InstructionsInitial Setup Instructions Additional Setup Instructions Whats Next? Chassis Information ScreenField Input Description Configuring the MCC Card and DSL Cards Configuring the Hotwire DslamFor the Management Domain, perform task See For each Access Node, perform task SeeClear Nvram Setting the IP Address and Subnet MaskSetting Time and Date Configuration → Snmp → Communities/Traps A-F-B Creating the Default RouteConfiguring the Active Vlan on each DSL or MVL Port Configuring VLANs on a DSL or MVL CardConfiguring Static Users Configuring the Next Hop Router for each VlanConfiguring the Hotwire Dslam DSL Configuration Card Status Screens MVL and 8510 DSL Card ConfigurationCard Info Card Information Card Status Options 1Time/Date Nvram ClearCard Status Options 2 Apply Download Card Status Options 3DSL Configuration Ports Screens Ports Options 1Ethernet Port DSL Ports DSL Parameters 8510 Card Ports Options 2DSL Configuration Interfaces Screens Ports Options 3DSL Ports DSL Parameters 8310 Card Interfaces Options DSL Configuration Users ScreensGeneral General Interfaces Control Control InterfacesDSL Configuration Bridge Screens General Bridge Options 1Card Vlan Card Port Vlan PortClient Vlan Client Bridge Options 2ARP Parameters and Add ARP Entry E a and B Parameters aDSL Configuration Service Node Screens Service Node OptionsSN Configuration DSL Monitoring Card Status Screens Monitoring the Hotwire DslamLogin History Card Status OptionsCard Info General Card Information DSL Monitoring Physical Layer Screens Physical Layer Options 1Active List Active Ports List Ethernet Stats Ethernet Statistics Physical Layer Options 2Physical Layer Options 3 EtherHDLC Stats EtherHDLC StatisticsInitialized EtherHDLC Ports ± s1c, s1d, s1e, or s1f Physical Layer Options 4 DSL Link Perf DSL Link Performance SummaryDSL Perf Stats DSL Performance Stats DSL Error Stats Physical Layer Options 5DSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens Monitor Interfaces Options Active List Active Interfaces ListStatus Interface Status Monitoring → Network Protocol B-D DSL Network Protocol ScreensNetwork Protocol Options 1 Socket StatisticsUDP Statistics TCP Statistics TCP Data Statistics Network Protocol Options 2Network Protocol Options 3 TCP Connection StatisticsIP Statistics Network Protocol Options 4 Icmp Statistics Icmp Packet StatisticsSnmp Statistics Network Protocol Options 5 Snmp Authentication StatisticsDSL Bridge Screens MAC Table Bridge TableClient User to Display ± Entry numberARP Table DSL SN Information Screen Service Node Options Diagnostics and Troubleshooting Diagnostic ScreensApplications Screens Alarms Card Alarms Diagnostics OptionsSelftest DSL Packet Echo TestR U U U X TroubleshootingMajor Alarms 1 Failure Type Action Checking AlarmsMajor Alarms 2 Failure Type Action Ethernet port 1. Check cable connections to the DslamFailure Minor Alarms 1 Failure Type Action MarginThreshold Link Down Minor Alarms 2 Failure Type ActionNetwork Problems Slow PerformanceExcessive Collisions No Response at Startup Cannot Upload Configurations to a Unix ServerDiagnostics and Troubleshooting Download Code and Apply Tftp Server Configuration Download CodeFully Functional System Deferred Apply Download Only System Automatic Immediate Apply Apply DownloadDownload Code and Apply Download Traps DSL Card TrapsEvent Trap Class Comment Trap # ± MIB Traps Event Trap Class Comment Trap # ± MIB Traps Glossary Ethernet E1aEthernet address FilterPacket Service NodePots Splitter Proxy ARPTerminal emulation TelnetTraceRoute UpstreamIN-1 IndexIN-2