ENGLISH
•Before using the machine, make sure that the hot water/steam knob (7) is closed and that there is a sufficient amount of water in the tank.
•(Fig.4B) - If the machine is off, turn it on by pressing the ON/OFF switch (2); the light (3) will go on.
•Wait until the temperature ready light (5) goes on; now the machine is ready to dispense coffee.
5.1With ground coffee
•(Fig.8A) - Place the filter (15) inside the “Crema” filter holder (14).
•(Fig.10) - Fit the “Crema” filter holder into the brew unit (8) from below.
•(Fig.11) - Turn the filter holder from left to right until it locks into place.
•Let go of the handle of the “Crema” filter holder. An automatic system will now cause the handle to shift slightly back to the left. This serves to ensure that the “Crema” filter will function perfectly.
•(Fig.13) - Preheat the “Crema” filter holder by pressing the coffee switch (4); water will start to come out of the “Crema” filter holder (this operation is only necessary for the first cup of coffee).
•After allowing 50cc of water to flow out, press the coffee switch (4) again to shut off the flow of hot water.
•(Fig.15) - Remove the “Crema” filter holder from the machine by turning it from right to left and empty out any water inside it.
•Thanks to the special “Crema” filter holder
(14)supplied with your machine, you need not change the filter when you switch between one and two cups of coffee.
•(Fig.8B) - Pour 1 or 2 level measures of ground coffee in the filter, depending on whether you want to make one or two cups of coffee; wipe the edge of the filter holder clean of any coffee grounds.
Making coffee
•(Fig.10) - Fit the “Crema” filter holder into the brew unit (8) from below.
•(Fig.11) - Turn the filter holder from left to right until it locks into place.
•(Fig.12) - Place 1 or 2 preheated cups beneath the “Crema” filter; make sure that you position them properly under the coffee outlets.
•(Fig.13) - Press the coffee button (4).
•When you have dispensed the desired amount of coffee, press the coffee button (4) again to stop flow and remove the cups containing the coffee (Fig.14).
•(Fig.15) - After making coffee, wait a few seconds, remove the “Crema” filter holder and empty out the used grounds.
Cleaning note: keep the coffee filter clean by detaching it from the “Crema” filter holder and washing it with
drinking water (Fig.16).
5.2With coffee pods
•(Fig.9) - Fit the adaptor for pods (18) into the “Crema” filter holder (14), then also put the filter (17).
•(Fig.10) - Fit the “Crema” filter holder into the brew unit (8) from below.
•(Fig.11) - Turn the filter holder from left to right until it locks into place.
•Let go of the handle of the “Crema” filter holder. An automatic system will now cause the handle to shift slightly back to the left. This serves to ensure that the “Crema” filter will function perfectly.
•(Fig.13) - Preheat the “Crema” filter holder by pressing the coffee switch (4); water will start to come out of the “Crema” filter holder (this operation is only necessary for the first cup of coffee).
•After allowing 50cc of water to flow out, press the coffee switch (4) again to shut off the flow of hot water.
• 24 •