Saeco Coffee Makers HD8966 manual Automatic Rinse/Cleaning Cycle

Page 15

ENGLISH 13

The machine is in warm-up phase.

HEATING UP…

Automatic Rinse/Cleaning Cycle

When warm-up is complete, the machine automatically performs a rinse/ self-cleaning cycle of the internal circuit with fresh water. This takes less than a minute.

Place a container under the dispensing spout to catch the small amount of water which will be dispensed.

RINSING

2The following display is shown. Wait for the cycle to finish automati- cally.

Note:

To stop dispensing, press the “” button.

3When the above steps are complete, the machine shows this display. You can now perform the manual rinse cycle.

Image 15
Contents 02 EN Important Safeguards Instructions for the Power Supply Cord Contents English Safety Instructions English Always put the machine on a fl at and stable surface Compliance with Standards 1c 2 1b InstallationGeneral Description Machine Installation Preparing for USEMachine Packaging Put the lid back on the coffee bean hopper Language Selection Using the Machine for the First TimeAutomatic Rinse/Cleaning Cycle Press the button Manual Rinse CycleInsert Preground Coffee Press OK English Measuring and Programming Water Hardness Coffee Profiles Maintenance Settings Statistics INTENZA+Water Filter Installation Activate FILTER? Place a container under the hot water dispensing spout Replacing the INTENZA+Water Filter Removing the Coffee Bean Hopper Changing Coffee BeansInserting the Coffee Bean Hopper English Coffee Emptying Cycle Machine performs a grinding cycle without brewing coffee Profile Selection Adjustments Coffee ProfileEnabling a New Profile Disabling a User Profile Arabica User Enable Profile Disable Profile Saeco Adapting System Adjusting the Ceramic Coffee GrinderAdjusting the Aroma Coffee Strength Adjusting the Dispensing Spout Adjusting the Coffee Quantity Brewing Coffee Coffee Brewing Using Coffee BeansPress the button to enter the aroma selection menu Coffee Brewing Using Pre-Ground CoffeeInsert Preground Coffe Press OK Filling the Milk Carafe Milk CarafeRemoving the Milk Carafe Inserting the Milk CarafeEmptying the Milk Carafe Brewing MILK-BASED Beverages Cappuccino Insert the Carafe With the Spout Open Cappuccino Adjusting the Milk-Based Product Length English Hot Water Special BeveragesEnglish Adjusting the Hot Water Dispensing Special Beverages Menu for Brewing Other Beverages HOT Water Ristretto Espresso Mild Espresso Intense Memo Beverage Programming Temperature AromaCoffee Quantity Water Quantity TasteMilk Quantity HOT Water ProgrammingTo confirm Restoring Beverage ParametersButton Machine ProgrammingStand-by Settings Language SettingsStatistics Factory SettingsMaintenance Brew Group Cleaning CycleDescaling Coffee Circuit Cleaning Cleaning of the CarafeDaily Cleaning of the Machine Cleaning and MaintenanceEnglish Daily Cleaning of the Milk Carafe Daily Cleaning of the Water TankEnglish Frothed Milk Insert the Carafe With the Spout Open Weekly Cleaning of the Milk Carafe Weekly Cleaning of the MachineEnglish Weekly Cleaning of the Brew Group Do not use detergent or soap to clean the brew group English Monthly Cleaning of the Milk Carafe Start Carafe WASHING? Never drink the solution dispensed during this step Fill Carafe With Fresh Water Monthly Lubrication of the Brew Group Monthly Cleaning of the Brew Group with Coffee Oil Remover Press the button to select Maintenance Press to confirm Place a Container Under Dispensing Spout English Descaling Empty the drip tray internal / external Press the button Pause English Display Messages Displayed message Meaning of the messageSpout open Machine actions Causes TroubleshootingMachine actions Causes Solutions Been shifted Stand-by Energy SavingDisposal Service Technical SpecificationsWarranty and Service WarrantyOrdering Maintenance Products Machine Accessories 02 IT
Related manuals
Manual 96 pages 1.62 Kb