Saeco Coffee Makers HD8966 manual Insert Preground Coffe Press OK

Page 40

38ENGLISH

6 Open the pre-ground coffee compartment lid.

7Add one measuring scoop of pre-ground coffee into the compartment.

Use only the measuring scoop supplied with the machine. Then close the pre-ground coffee compartment lid.

Warning:

Add only pre-ground coffee to the pre-ground coffee compartment. Other substances and objects may cause severe damage to the ma- chine. This repair is not covered by your warranty!

8 Press the “” button. After the prebrewing cycle, coffee begins to pour out of the dispensing spout.

INSERT

PREGROUND COFFE

AND PRESS OK

9 Coffee brewing automatically stops when the preset level is reached; press the same selected beverage button that you pressed previously to stop it earlier.

After brewing, the machine returns to the main menu.

Repeat the steps described above to brew more coffees using pre-ground coffee.

Note:

If no pre-ground coffee is poured into the compartment, only water will be dispensed.

If the dose is excessive or 2 or more measuring scoops have been added, the machine will discharge the excess ground coffee into the coffee grounds drawer.

It is not possible to memorize the brewing length with ground coffee.

Note:

This function remains active for 30 seconds. Then the machine resets the selection and goes back to the earlier status.

Image 40
Contents 02 EN Important Safeguards Instructions for the Power Supply Cord Contents English Safety Instructions English Always put the machine on a fl at and stable surface Compliance with Standards Installation 1c 2 1bGeneral Description Preparing for USE Machine InstallationMachine Packaging Put the lid back on the coffee bean hopper Using the Machine for the First Time Language SelectionAutomatic Rinse/Cleaning Cycle Manual Rinse Cycle Press the buttonInsert Preground Coffee Press OK English Measuring and Programming Water Hardness Coffee Profiles Maintenance Settings Statistics INTENZA+Water Filter Installation Activate FILTER? Place a container under the hot water dispensing spout Replacing the INTENZA+Water Filter Changing Coffee Beans Removing the Coffee Bean HopperInserting the Coffee Bean Hopper English Coffee Emptying Cycle Machine performs a grinding cycle without brewing coffee Profile Selection Coffee Profile AdjustmentsEnabling a New Profile Disabling a User Profile Arabica User Enable Profile Disable Profile Adjusting the Ceramic Coffee Grinder Saeco Adapting SystemAdjusting the Aroma Coffee Strength Adjusting the Dispensing Spout Adjusting the Coffee Quantity Coffee Brewing Using Coffee Beans Brewing CoffeeCoffee Brewing Using Pre-Ground Coffee Press the button to enter the aroma selection menuInsert Preground Coffe Press OK Milk Carafe Filling the Milk CarafeInserting the Milk Carafe Removing the Milk CarafeEmptying the Milk Carafe Brewing MILK-BASED Beverages Cappuccino Insert the Carafe With the Spout Open Cappuccino Adjusting the Milk-Based Product Length English Special Beverages Hot WaterEnglish Adjusting the Hot Water Dispensing Special Beverages Menu for Brewing Other Beverages HOT Water Ristretto Espresso Mild Espresso Intense Memo Beverage Programming Aroma TemperatureCoffee Quantity Taste Milk QuantityHOT Water Programming Water QuantityRestoring Beverage Parameters To confirmMachine Programming ButtonLanguage Settings Stand-by SettingsFactory Settings StatisticsBrew Group Cleaning Cycle MaintenanceDescaling Cleaning of the Carafe Coffee Circuit CleaningCleaning and Maintenance Daily Cleaning of the MachineEnglish Daily Cleaning of the Water Tank Daily Cleaning of the Milk CarafeEnglish Frothed Milk Insert the Carafe With the Spout Open Weekly Cleaning of the Machine Weekly Cleaning of the Milk CarafeEnglish Weekly Cleaning of the Brew Group Do not use detergent or soap to clean the brew group English Monthly Cleaning of the Milk Carafe Start Carafe WASHING? Never drink the solution dispensed during this step Fill Carafe With Fresh Water Monthly Lubrication of the Brew Group Monthly Cleaning of the Brew Group with Coffee Oil Remover Press the button to select Maintenance Press to confirm Place a Container Under Dispensing Spout English Descaling Empty the drip tray internal / external Press the button Pause English Displayed message Meaning of the message Display MessagesSpout open Troubleshooting Machine actions CausesMachine actions Causes Solutions Been shifted Energy Saving Stand-byDisposal Technical Specifications Warranty and ServiceWarranty ServiceOrdering Maintenance Products Machine Accessories 02 IT
Related manuals
Manual 96 pages 1.62 Kb