Saeco Coffee Makers HD8966 manual Language Settings, Stand-by Settings

ENGLISH 57

	Under HARDNESS you can set the water hardness level.
WATER	For water hardness measuring, refer to the “Measuring and Programming
HARDNESS
	Water Hardness” chapter.
ENABLE FILTER
ACTIVATE FILTER

	Under ENABLE FILTER the machine notifies the user when the water filter
WATER	needs to be replaced.
HARDNESS
	OFF: Filter and warning disabled. (Default value) By setting the value
ENABLE FILTER
ACTIVATE FILTER	on OFF you disable the filter and the replacement warning.
	ON: Filter and warning enabled (this warning is automatically set when
	the filter is activated).

Under ACTIVATE FILTER you activate the filter after its installation or

WATERreplacement. Refer to the chapter “INTENZA+ Water Filter Installation”.

HARDNESS

ENABLE FILTER

ACTIVATE FILTER

	Language Settings
	This setting is important to automatically adjust the machine parameters
	according to the user's country.
SETTINGS
WATER
LANGUAGE
STAND-BY
RESTORE TO DEFAULT
	Stand-by Settings
	The STAND-BYsets the time lapse for the machine to go into stand-by
SETTINGS
WATER	mode after last brewing. The stand-by time ranges among 15, 30, 60 and
LANGUAGE	180 minutes.
STAND-BY	The default time value is 30 minutes.
RESTORE TO DEFAULT