88ENGLISH
Machine actions | Causes | Solutions |
The coffee is too weak (see note).
This might occur when the machine | Brew a few coffees as described in chap- |
is automatically adjusting the dose. | ter “Saeco Adapting System”. |
|
|
The ground coffee is too coarse. | Change coffee blend or adjust the grind |
| as explained in the “Adjusting the Ceramic |
| Coffee Grinder” chapter. |
|
|
| The coffee bean hopper selector has | Switch the selector to the “ ” position. |
| been shifted. |
|
|
|
|
Coffee is brewed slowly (see | The ground coffee is too fine. | Change coffee blend or adjust the grind |
note). |
| as explained in the “Adjusting the Ceramic |
|
| Coffee Grinder” chapter. |
|
|
|
| Circuits clogged. | Perform a descaling cycle. |
|
|
|
| The brew group is dirty. | Clean the brew group (see the “Weekly |
|
| Cleaning of the Brew Group” chapter). |
|
|
|
Coffee leaks out of the | The dispensing spout is clogged or | Clean the dispensing spout and its holes |
dispensing spout. | not correctly inserted. | and insert it back correctly. |
|
|
|
Note:
These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a