Unpacking, Placement, CD Inputs, Tuner Inputs

Unpacking

Remove the unit carefully from its packing. Find the remote control and other accessories. Save the box as it will protect the RSP-1098 if you move or need to return it for maintenance.

Placement

Place the RSP-1098 on a solid, level surface away from sunlight, heat, moisture, or vibra- tion. Make sure that the shelf can support the weight of the unit.

Place the RSP-1098 close to the other com- ponents in your system and, if possible, on its own shelf. This will make initial hookup, and subsequent system changes easier.

The RSP-1098 can generate heat during nor- mal operation. Do not block ventilation open- ings. Allow a minimum of 10 cm (4 inches) of unobstructed space around the unit. If in- stalled in a cabinet, make sure that there is adequate ventilation.

Don’t stack other components or objects on top of the RSP-1098. Don’t let any liquid fall into the unit.

CONNECTIONS

Although, the RSP-1098’s rear panel looks daunting, connecting the unit to your system is straightforward. Each of the source compo- nents in the system are connected to the RSP-1098 inputs with a pair of standard RCA cables for analog audio, a video connection (composite, S-Video, or Component Video), and an optional digital audio cable (coax or optical).

NOTE: Surround formats like Dolby Digital and DTS are digital formats and the RSP-1098 can only decode them when a digital input signal is available. For this reason, you should always connect your DVD player’s digital outputs to the RSP-1098, using either the op- tical or coax inputs.

The outputs of RSP-1098 are sent to the power amplifier(s) with standard RCA cables from preamp audio outputs. The video signal from the RSP-1098 is sent to the TV monitor using composite video, S-Video, or Component Video connections.

In addition, the RSP-1098 has MULTI input con- nections for a source component that does its own surround decoding, remote IR sensor inputs, and 12V trigger connections for remote turn-on of other Rotel components.

NOTE: Do not plug any system component into an AC source until all connections have been properly made.

Video cables should have a 75 ohm imped- ance. The S/PDIF digital audio interface stan- dard also specifies a 75 ohm impedance and all good digital cables adhere to this require- ment. Do NOT substitute conventional audio interconnect cables for digital or video signals. Standard audio interconnects will pass these signals, but their limited bandwidth reduce per- formance.

When making signal connections, connect LEFT channels to LEFT channel jacks and RIGHT chan- nels to RIGHT channel jacks. All RCA-type connections on the RSP-1098 follow these stan- dard color codes:

Left channel audio: white RCA jack

Right channel audio: red RCA jack

Composite video: yellow RCA jack

English

NOTE: Each source input must be properly configured using the INPUT SETUP menu of the OSD menu system. We recommend go- ing to this menu after connecting each source to configure it as desired. See Input Setup of the Setup section for information.

Analog Audio Inputs & Outputs

The following connections are used for con- necting analog audio signals to and from the RSP-1098. See the Making Connections topic for specific instructions on connecting each type of component.

NOTE: Normally, the RSP-1098 converts ana- log inputs to digital signals. All of the digital processing is available including bass man- agement, digital crossovers, speaker level and delay settings and a number surround mode options including 2-ch stereo, Dolby Pro Logic II, etc. Alternatively, there is an analog by- pass surround mode that routes 2-ch analog inputs directly to the Volume control and preamp outputs, bypassing the digital pro- cessing entirely for pure analog stereo.

CD Inputs

A left/right pair of RCA analog audio inputs for connecting a CD player.

Tuner Inputs

A left/right pair of RCA analog audio inputs for connecting an AM/FM tuner.

TAPE Inputs

A pair of RCA inputs, labeled TAPE IN, for connecting the left/right analog audio signals from an audio tape deck or recording device.

TAPE Outputs

A pair of RCA inputs, labeled TAPE OUT, for sending left/right line level analog audio sig- nals for recording on a tape deck or record- ing device.

NOTE: These outputs should be connected to the inputs of the same tape deck connected to the TAPE IN inputs.

RSP-1098 specifications

The Rotel RSP-1098 is a remarkable surround sound processor that has set a high standard in the realm of home theater systems. Designed for audiophiles and movie enthusiasts alike, the RSP-1098 embodies innovative technology and high-performance audio processing.

One of the standout features of the RSP-1098 is its advanced digital signal processing capabilities. This processor utilizes a 24-bit/192kHz DAC, allowing for incredibly precise audio reproduction that enhances the listening experience. The RSP-1098 supports a variety of audio formats, including Dolby Digital, DTS, and PCM, making it versatile enough for any media format you may encounter.

The unit provides multiple inputs and outputs, ensuring seamless connectivity with various audio and video components. Its seven-channel outputs facilitate the connection of a complete surround sound system. Additionally, the RSP-1098 includes balanced XLR outputs, which minimize noise and signal degradation, making it ideal for high-end audio systems.

Another major highlight of the Rotel RSP-1098 is its extensive room correction technology. The built-in Auto Setup feature utilizes a microphone to analyze your room’s acoustics, automatically adjusting settings for optimal sound. This ensures that you achieve the best audio performance regardless of your room’s characteristics.

The processor also features a user-friendly interface with an intuitive on-screen display, making it easy to navigate through settings and configurations. Equipped with a comprehensive remote control, the RSP-1098 allows you to take command of your home theater experience from the comfort of your seat.

In terms of build quality, Rotel is known for its commitment to excellence. The RSP-1098 features a robust chassis that minimizes vibrations, ensuring that the audio performance remains unadulterated. The elegant design, combined with high-quality components, resonates with the brand's dedication to achieving top-tier sound.

Overall, the Rotel RSP-1098 remains a significant player in the high-end audio segment, delivering exceptional performance, advanced technologies, and an impressive range of features. For those seeking an enriching home theater experience, the RSP-1098 stands out as a worthy investment that promises to elevate your audiovisual enjoyment to new heights.