Rotel RSP-1098 owner manual Front Panel Overview

Page 18

RSP-1098Surround Sound Processor

18

through an analog 100 Hz low pass filter, creating a summed mono subwoofer output derived from the main channels. See the IN- PUT SETUP menu in the Setup section of this manual for details on bass redirect feature.

TV Monitor

Connect the TV MONITOR output to the cor- responding input on your television monitor, using composite video, S-Video, and/or Com- ponent Video cables.

NOTE: The RCA composite video output only sends signals from RCA composite video source inputs to the TV monitor. The S-Video output only sends signals from S-Video video source inputs to the TV. The RSP-1098 upconverts composite and S-Video signals to Component Video signals. Therefore, the Component Video output sends signals from any source input to the TV.

When configuring the unit, you must specify either an NTSC or a PAL standard TV moni- tor. See the Other Options menu in the Setup section of this manual.

Amplifiers and Powered Subwoofers

To hook up a powered subwoofer,

connect a standard RCA audio cable from either the two PREOUT jacks labeled SUB to the input on the subwoofer’s power amp. Both SUB outputs provide the same signal.

To hook up amplifiers, connect an audio cable from each PREOUT jack to the input of the amplifier channel that will power the cor- responding speaker. In a full home theater system, you will need to make five different connections in addition to the subwoofer . These connections are labeled FRONT L &R, CEN- TER, and REAR L & R. There are two CENTER jacks, use either jack for a single center channel or both if you have two center channels

In six or seven channel systems, you will make one or two additional connections for center back speaker(s). These jacks are labeled CB1 and CB2. Use CB1 for a single center back channel.

Make sure that you have each output connected to the correct amplifier channel (front right, left rear, etc.).

OPERATING

THE RSP-1098

Considering its large number of features, set- tings, and options, the RSP-1098 is remark- ably easy to operate. The key to the operat- ing the RSP-1098 is its system of On-Screen Displays (OSD) which guide you through various choices. These OSD menus can ap- pear on the television monitor and/or on the front panel TFT color LCD screen.

The RSP-1098 can be operated from the front panel or the remote control. Front panel con- trols are unusually simple to use, with just a few knobs and buttons to guide you through OSD menu options. The remote control pro- vides more complete control options.

To guide you through the operation of the RSP-1098, this section of the manual starts with explaining the basic layout and function of the front panel and the remote control. Then, we explain the basic operations such as turning the unit on and off, adjusting volume, select- ing a source for listening, etc. Following that is a detailed explanation of surround sound modes and how to configure the RSP-1098 for various types of recordings. Finally, there are instructions for additional features and Zone 2 operations. All of these are features that may be used in normal use. The last section of the manual (Configuration) details options that may be selected during initial setup and configu- ration of the unit, many of which will be set once and left untouched.

Throughout this manual, numbers in gray boxes refer to the RSP-1098 illustration at the front of this manual. Letters refer to the RR-1050 re- mote illustration. When both appear, the func- tion is found on both the RSP-1098 and the remote. When only one appears, that func- tion is found only on the RSP-1098 or the re- mote.

Front Panel Overview

The following is a brief overview of the con- trol and features on the front panel of the RSP-1098. Details concerning the use of these controls are provided in subsequent sections of this manual describing various tasks.

Color TFT Display

In the center of the front panel is a large widescreen format TFT color LCD display. The display is used for two purposes: displaying OSD menus and as a built-in TV monitor for any composite video signal coming into the RSP-1098, making it ideal for navigating DVD menus, monitoring a remote camera, or just watching TV.

MENU button

The MENU button toggles on or off the SYS- TEM STATUS menu showing the current set- tings of the RSP-1098. Pressing the ENTER button on the remote (or the FUNCTION knob on the front panel) from the SYSTEM STATUS menu takes you to additional menus for con- figuring the RSP-1098’s many options. See the Setup section of the manual for more detail on the OSD menus.

NOTE: Turn off power to the front panel display by pressing and holding the MENU button.

DISPLAY Button

The DISPLAY button provides access to two set- tings for the front panel TFT screen and OSD menu displays: selecting a video source for display on the TFT screen and selecting whether OSD menus are displayed on the front panel TFT, the TV monitor, or both.

STANDBY Button

The front panel STANDBY button activates or deactivates the unit. The rear panel master STANDBY button must be in the ON position for the remote standby function to operate.

VOLUME Knob

The large knob at the right side of the front panel is the master VOLUME control, adjust- ing the output level of all channels simulta- neously. In addition, it can be used to adjust the ZONE 2 volume.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents RSP-1098 Page Important Safety Instructions FCC InformationRSP-1098Surround Sound Processor Front and Rear PanelsEnglish RR-1050 RemoteDelay On-Screen Display/TFT Screen MenusOutputs AmplifiersubwooferSource Connections DVDZone 2 Connections Rotel RSP-1098Contents Specifications Menu BasicsAudio features Surround featuresVideo features Other featuresCD Inputs PlacementUnpacking Tuner InputsMulti Inputs Video 1-5 Audio Inputs Preamp OutputsVideo 1-3 Audio Outputs Zone 2 Audio OutputsDigital Audio Input & Outputs Other Connections Cable, Satellite, or Hdtv Tuner CD PlayerDVD Player AM/FM TunerFront Panel Overview Power Button Mode ButtonUsing the RR-1050 Audio Button Mute ButtonBasic Operations Display Options Volume AdjustmentsSelecting Inputs To select a source for ListeningDolby Surround Dolby Pro Logic Overview Surround FormatsSelecting a Source from the Remote Dolby DigitalDSP Music Modes DTS Neo67.1 Surround 2Ch/5Ch/7Ch Stereo FormatsModes Manually Selecting Surround ModesOther Digital Formats Dolby Digital Dolby Digital Surround EX DTS DTS 96/24 DTS-ESMpeg Multichannel Digital Stereo PCM, MP3, and HdcdAnalog Stereo Contour/Tone Settings Other SettingsTemporary Group Delay Temporary Speaker LevelCinema EQ Zone 2 Power On/Off OperationZone 2 Operation Controlling Zone 2 from the Front PanelMenu Basics Navigation ButtonsSystem Status Configuring Inputs Input SetupMain Menu Multi Input Setup Configuring Speakers and Audio Understanding Speaker ConfigurationSurround Speakers large/small Speaker SetupCenter Speakers large/small Center Back Speakers large1Crossover 40Hz/60Hz/80Hz/ 100Hz/120Hz/150Hz/200Hz/OFF Advance Speaker SetupSubwoofer Setup Crossover 40Hz/60Hz/80HzTest Tone Calibration with an SPL meterOther Options Delay SetupContour Setup Speaker front/center/surround/cenZone 2 Setup Default SetupTo restore the Factory Default set Troubleshooting Video SpecificationsAudio GeneralRotel of America Rotel EuropeRotel Deutschland

RSP-1098 specifications

The Rotel RSP-1098 is a remarkable surround sound processor that has set a high standard in the realm of home theater systems. Designed for audiophiles and movie enthusiasts alike, the RSP-1098 embodies innovative technology and high-performance audio processing.

One of the standout features of the RSP-1098 is its advanced digital signal processing capabilities. This processor utilizes a 24-bit/192kHz DAC, allowing for incredibly precise audio reproduction that enhances the listening experience. The RSP-1098 supports a variety of audio formats, including Dolby Digital, DTS, and PCM, making it versatile enough for any media format you may encounter.

The unit provides multiple inputs and outputs, ensuring seamless connectivity with various audio and video components. Its seven-channel outputs facilitate the connection of a complete surround sound system. Additionally, the RSP-1098 includes balanced XLR outputs, which minimize noise and signal degradation, making it ideal for high-end audio systems.

Another major highlight of the Rotel RSP-1098 is its extensive room correction technology. The built-in Auto Setup feature utilizes a microphone to analyze your room’s acoustics, automatically adjusting settings for optimal sound. This ensures that you achieve the best audio performance regardless of your room’s characteristics.

The processor also features a user-friendly interface with an intuitive on-screen display, making it easy to navigate through settings and configurations. Equipped with a comprehensive remote control, the RSP-1098 allows you to take command of your home theater experience from the comfort of your seat.

In terms of build quality, Rotel is known for its commitment to excellence. The RSP-1098 features a robust chassis that minimizes vibrations, ensuring that the audio performance remains unadulterated. The elegant design, combined with high-quality components, resonates with the brand's dedication to achieving top-tier sound.

Overall, the Rotel RSP-1098 remains a significant player in the high-end audio segment, delivering exceptional performance, advanced technologies, and an impressive range of features. For those seeking an enriching home theater experience, the RSP-1098 stands out as a worthy investment that promises to elevate your audiovisual enjoyment to new heights.
Top Page Image Contents