Rotel RSP-1098 owner manual Zone 2 Setup, Default Setup, To restore the Factory Default set

Page 37

POWER: This setting determines how the RSP-1098 powers up. With the default DIRECT setting, the unit is fully activated when AC power is applied and the rear panel POWER button is ON; however, it may be put in standby mode using the front panel STANDBY button or the remote ON/OFF buttons. This would be the normal setting for most systems.

With the STANDBY setting, the unit powers up in standby mode when AC is applied and the rear panel POWER button is ON. The unit must be activated using the front panel STANDBY button or the remote ON/OFF buttons.

In ALWAYS-ONmode, the unit remains fully active whenever AC is present and the rear panel POWER button is ON; the front panel STANDBY button and the remote ON/OFF buttons are disabled and the unit cannot be put in standby mode.

LANGUAGE: Selects a language for the OSD/TFT displays.

VIDEO: Specifies whether an NTSC or PAL television monitor is connected to the TV MONITOR outputs of the RSP-1098. This set- ting must be correct for the upconversion and OSD menus to work properly.

Change settings on the OTHER OPTIONS menu by highlighting the desired line using the UP/ DOWN buttons and using the +/– buttons to step through the available settings. To return to the MAIN menu, press the ENTER button. Press the MENU/OSD button on the remote to cancel the display and return to normal operation.

37

Zone 2 Setup

ZONE2 SETUP

SOURCE:Off

VOLUME SETUP:Variable

VOLUME:60

TURN ON VOL:Last

MAX VOL:Max

12V TRIGGER:Off

MAIN MENU

The ZONE 2 SETUP menu provides settings and configuration options related to the op- eration of Zone 2. This menu is reached by highlighting the ZONE 2 line on the MAIN menu and pressing ENTER.

SOURCE: Specifies a source for listening in Zone 2. Options are CD, TUNER, TAPE, VIDEO 1–5, SOURCE, and OFF. Selecting the SOURCE option links the Zone 2 source to the source selected for the main zone so that Zone 2 will hear the same source as the main zone. Selecting the OFF option turns Zone 2 off.

VOLUME SETUP: configures the Zone 2 outputs for VARIABLE or FIXED volume levels. VARIABLE allows control of the volume settings in Zone 2 from the RSP-1098 front panel or from a remote control/IR repeater in Zone 2. FIXED output disables the Zone 2 volume control. In this mode, the Zone 2 level can be fixed at the level specified on the next line, thus optimizing system performance when send- ing a fixed level signal to a preamp or ampli- fier with its own volume adjustment.

VOLUME: In VARIABLE output mode, this line shows the current volume setting for Zone 2. In FIXED output mode, this volume setting es- tablishes a permanent fixed output level for Zone 2.

Move the highlight to the desired line using the UP/DOWN buttons and use the +/– but- tons to adjust the volume level. To return to the MAIN menu, press the ENTER button. Press the MENU/OSD button on the remote to cancel the display and return to normal operation.

TURN ON VOL: Specifies a default volume level to be used each time Zone 2 is activated. You can select LAST to have Zone 2 activate with the last previously used volume setting. Or, you specify a volume from MIN (full mute) to MAX, in 1 dB increments. Note that this setting cannot exceed the MAX VOL established in the next line of the menu.

English

MAX VOL: Specifies a maximum volume level for Zone 2. The volume cannot be adjusted above this level. Settings range from MIN to MAX, in 1dB increments.

12V TRIGGER: The RSP-1098 has four 12V trigger outputs that supply a 12V DC signal to turn on Rotel components and other com- ponents as needed. The 12V Trigger labeled ZONE2 is assigned to Zone 2 and can send a turn-on signal to remote components when- ever Zone 2 is activated. Select the ON set- ting to have the ZONE2 trigger output send the turn-on signal. Select the OFF setting to dis- able the 12V trigger function for Zone 2.

Default Setup

DEFAULT SETUP

FACTORY DEFAULT:No

USER DEFAULT:No

SET USER DEFAULT:No

MAIN MENU

The DEFAULT SETUP menu provides access to three functions:

•Restore all features and settings to the origi- nal FACTORY DEFAULT settings.

•Memorize a custom group of settings as a USER DEFAULT.

•Activate the memorized USER DEFAULT set- tings.

To restore the FACTORY DEFAULT set-

tings: Place the highlight on the FACTORY DEFAULT line using the UP/DOWN buttons and use the +/– buttons to change the setting to YES. Press the ENTER button to proceed with resetting the FACTORY DEFAULT settings. The unit will power off and then on, with the fac- tory settings restored. To return to the MAIN menu without resetting the FACTORY DEFAULT settings, change the entry to NO and press the ENTER button.

NOTE: Resetting to factory default settings will erase all stored settings including delay set- tings, speaker settings, balance settings, in- put settings and more. You will lose ALL system configuration settings. Be certain that you wish to do so before resetting the factory defaults.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents RSP-1098 Page FCC Information Important Safety InstructionsFront and Rear Panels RSP-1098Surround Sound ProcessorRR-1050 Remote EnglishOn-Screen Display/TFT Screen Menus DelayAmplifiersubwoofer OutputsDVD Source ConnectionsRotel RSP-1098 Zone 2 ConnectionsContents Menu Basics SpecificationsVideo features Surround featuresAudio features Other featuresUnpacking PlacementCD Inputs Tuner InputsVideo 1-3 Audio Outputs Video 1-5 Audio Inputs Preamp OutputsMulti Inputs Zone 2 Audio OutputsDigital Audio Input & Outputs Other Connections DVD Player CD PlayerCable, Satellite, or Hdtv Tuner AM/FM TunerFront Panel Overview Using the RR-1050 Audio Button Mode ButtonPower Button Mute ButtonBasic Operations Selecting Inputs Volume AdjustmentsDisplay Options To select a source for ListeningSelecting a Source from the Remote Overview Surround FormatsDolby Surround Dolby Pro Logic Dolby Digital7.1 Surround DTS Neo6DSP Music Modes 2Ch/5Ch/7Ch Stereo FormatsManually Selecting Surround Modes ModesOther Digital Formats DTS DTS 96/24 DTS-ES Dolby Digital Dolby Digital Surround EXDigital Stereo PCM, MP3, and Hdcd Mpeg MultichannelAnalog Stereo Temporary Group Delay Other SettingsContour/Tone Settings Temporary Speaker LevelZone 2 Operation Zone 2 Power On/Off OperationCinema EQ Controlling Zone 2 from the Front PanelNavigation Buttons Menu BasicsSystem Status Input Setup Configuring InputsMain Menu Multi Input Setup Understanding Speaker Configuration Configuring Speakers and AudioCenter Speakers large/small Speaker SetupSurround Speakers large/small Center Back Speakers large1Subwoofer Setup Advance Speaker SetupCrossover 40Hz/60Hz/80Hz/ 100Hz/120Hz/150Hz/200Hz/OFF Crossover 40Hz/60Hz/80HzCalibration with an SPL meter Test ToneContour Setup Delay SetupOther Options Speaker front/center/surround/cenDefault Setup Zone 2 SetupTo restore the Factory Default set Troubleshooting Audio SpecificationsVideo GeneralRotel Europe Rotel of AmericaRotel Deutschland

RSP-1098 specifications

The Rotel RSP-1098 is a remarkable surround sound processor that has set a high standard in the realm of home theater systems. Designed for audiophiles and movie enthusiasts alike, the RSP-1098 embodies innovative technology and high-performance audio processing.

One of the standout features of the RSP-1098 is its advanced digital signal processing capabilities. This processor utilizes a 24-bit/192kHz DAC, allowing for incredibly precise audio reproduction that enhances the listening experience. The RSP-1098 supports a variety of audio formats, including Dolby Digital, DTS, and PCM, making it versatile enough for any media format you may encounter.

The unit provides multiple inputs and outputs, ensuring seamless connectivity with various audio and video components. Its seven-channel outputs facilitate the connection of a complete surround sound system. Additionally, the RSP-1098 includes balanced XLR outputs, which minimize noise and signal degradation, making it ideal for high-end audio systems.

Another major highlight of the Rotel RSP-1098 is its extensive room correction technology. The built-in Auto Setup feature utilizes a microphone to analyze your room’s acoustics, automatically adjusting settings for optimal sound. This ensures that you achieve the best audio performance regardless of your room’s characteristics.

The processor also features a user-friendly interface with an intuitive on-screen display, making it easy to navigate through settings and configurations. Equipped with a comprehensive remote control, the RSP-1098 allows you to take command of your home theater experience from the comfort of your seat.

In terms of build quality, Rotel is known for its commitment to excellence. The RSP-1098 features a robust chassis that minimizes vibrations, ensuring that the audio performance remains unadulterated. The elegant design, combined with high-quality components, resonates with the brand's dedication to achieving top-tier sound.

Overall, the Rotel RSP-1098 remains a significant player in the high-end audio segment, delivering exceptional performance, advanced technologies, and an impressive range of features. For those seeking an enriching home theater experience, the RSP-1098 stands out as a worthy investment that promises to elevate your audiovisual enjoyment to new heights.
Top Page Image Contents