Rotel RSP-1098 owner manual Selecting Inputs, Volume Adjustments, Display Options

Page 21

Volume Adjustments

The listening volume of the RSP-1098 can be adjust from the front panel or the remote.

Front Panel: Rotate the front panel VOLUME knob clockwise to increase the volume, coun- terclockwise to decrease.

Remote: Press the VOL UP button to increase the volume; press the VOL DOWN button to decrease.

When you adjust the volume, the setting is shown on the TV monitor and/or the front panel TFT display. The current volume setting is also shown on the SYSTEM STATUS OSD screen.

NOTE: The front panel VOLUME control can be used to change the volume in Zone 2. Press the front panel PATH button three times to change from the LISTENING to the ZONE 2 control mode as shown by the OSD and/ or TFT display. Turning the VOLUME knob will then adjust the volume setting for ZONE

2.After 5 seconds, the PATH setting and VOLUME control revert to normal LISTENING mode operation.

21

Display Options

The front panel DISPLAY button provides ac- cess to two settings of the front panel TFT screen and OSD menu displays: selecting a video source for display on the TFT screen and se- lecting whether OSD menus are displayed on the front panel TFT screen, the TV monitor, or both.

•To view a video source on the TFT screen: press the DISPLAY button once. Then, rotate the FUNCTION knob to se- lect a source. Available display options are VIDEO 1–5, SOURCE (the same source se- lected for listening), or no video display.

•To change the OSD setting: press the DISPLAY button two times. Then, rotate the FUNCTION knob to select an OSD option. Available options are to view OSD menus on the TFT/LCD screen, the TV monitor, or both.

•To shut off power to the TFT screen: press and hold the MENU/OSD button on the remote or the MENU button on the front panel for 3 seconds.

English

input is assigned, the unit will not access a digital signal, even though one may be avail- able at the digital input.

By default, the source DEVICE/INPUT buttons are factory configured to select the following inputs:

CD:

Analog input

Tuner:

Analog input

Tape:

Analog input

Video 1:

Digital Coaxial 1

Video 2:

Digital Coaxial 2

Video 3:

Digital Coaxial 3

Video 4:

Digital Optical 1

Video 5:

Digital Optical 2

Each source input should be configured us- ing the INPUT SETUP menu system to use the desired input type (analog or digital auto-sens- ing).

NOTE: In addition to selecting analog or digital signals, the configuration options also permit custom labeling and selection of a default sur- round mode for each of the eight inputs.

Selecting a Source Input from the Front Panel

Muting the Sound

The volume of the RSP-1098 can be turned off or muted. Push the MUTE button on the front panel or the remote once to turn the sound off. A MUTE indication appears in the OSD and/or TFT displays. Press the MUTE button again to restore previous volume levels.

NOTE: If the TFT screen and TV monitor are turned off, muting the sound gives no visual indication, creating a false impression that the RSP-1098 is not working correctly.

Selecting Inputs

Up to three audio sources and five audio/video sources (Tuner, CD, DVD, VCR, etc.) can be connected to the RSP-1098. Any of these sources can be independently selected for lis- tening/viewing in the main room, for record- ing, or for listening/viewing in a remote Zone 2 location.

The OSD and/or TFT displays show the name of the current source selection as it is made. The labels for all input sources can be custom- ized to match your components.

All of the source inputs can be customized using the OSD configuration menus to accept either analog signals or digital signals from one of the eight assignable digital inputs. When a digital input is assigned, the RSP-1098 checks for the presence of a digital signal at that in- put. If a digital signal is present when the source is selected, it is automatically activated and the proper surround mode enabled. If no digital signal is present, the analog inputs for that source are selected. This auto-sensing is the preferred configuration for digital source in- puts such as DVD players. When an ANALOG

Selecting a source input from the front panel is a two-step process. First choose whether you are changing the source for LISTENING in the main room, for RECORDING, or for ZONE 2. Then, select the desired source.

To select a source for LISTENING:

1.Press the PATH button one time for LISTEN- ING selection.

2.Rotate the FUNCTION knob to cycle through the list of sources until you reach the desired source.

To select a source for RECORDING:

1.Press the PATH button two times for RECORD- ING selection.

2.Rotate the FUNCTION knob to cycle through the list of sources until you reach the desired source.

Selecting the “SOURCE” option links the lis- tening source to the record outputs, record- ing whatever listening source is selected now or in the future for recording.

NOTE: See the section on Zone 2 operations for details of selecting a source for the re- mote zone.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RSP-1098 Page FCC Information Important Safety InstructionsFront and Rear Panels RSP-1098Surround Sound ProcessorRR-1050 Remote EnglishOn-Screen Display/TFT Screen Menus DelayAmplifiersubwoofer OutputsDVD Source ConnectionsRotel RSP-1098 Zone 2 ConnectionsContents Menu Basics SpecificationsVideo features Surround featuresAudio features Other featuresUnpacking PlacementCD Inputs Tuner InputsVideo 1-3 Audio Outputs Video 1-5 Audio Inputs Preamp OutputsMulti Inputs Zone 2 Audio OutputsDigital Audio Input & Outputs Other Connections DVD Player CD PlayerCable, Satellite, or Hdtv Tuner AM/FM TunerFront Panel Overview Using the RR-1050 Audio Button Mode ButtonPower Button Mute ButtonBasic Operations Selecting Inputs Volume AdjustmentsDisplay Options To select a source for ListeningSelecting a Source from the Remote Overview Surround FormatsDolby Surround Dolby Pro Logic Dolby Digital7.1 Surround DTS Neo6DSP Music Modes 2Ch/5Ch/7Ch Stereo FormatsModes Manually Selecting Surround ModesOther Digital Formats DTS DTS 96/24 DTS-ES Dolby Digital Dolby Digital Surround EXMpeg Multichannel Digital Stereo PCM, MP3, and HdcdAnalog Stereo Temporary Group Delay Other SettingsContour/Tone Settings Temporary Speaker LevelZone 2 Operation Zone 2 Power On/Off OperationCinema EQ Controlling Zone 2 from the Front PanelMenu Basics Navigation ButtonsSystem Status Configuring Inputs Input SetupMain Menu Multi Input Setup Understanding Speaker Configuration Configuring Speakers and AudioCenter Speakers large/small Speaker SetupSurround Speakers large/small Center Back Speakers large1Subwoofer Setup Advance Speaker SetupCrossover 40Hz/60Hz/80Hz/ 100Hz/120Hz/150Hz/200Hz/OFF Crossover 40Hz/60Hz/80HzCalibration with an SPL meter Test ToneContour Setup Delay SetupOther Options Speaker front/center/surround/cenZone 2 Setup Default SetupTo restore the Factory Default set Troubleshooting Audio SpecificationsVideo GeneralRotel of America Rotel EuropeRotel Deutschland

RSP-1098 specifications

The Rotel RSP-1098 is a remarkable surround sound processor that has set a high standard in the realm of home theater systems. Designed for audiophiles and movie enthusiasts alike, the RSP-1098 embodies innovative technology and high-performance audio processing.

One of the standout features of the RSP-1098 is its advanced digital signal processing capabilities. This processor utilizes a 24-bit/192kHz DAC, allowing for incredibly precise audio reproduction that enhances the listening experience. The RSP-1098 supports a variety of audio formats, including Dolby Digital, DTS, and PCM, making it versatile enough for any media format you may encounter.

The unit provides multiple inputs and outputs, ensuring seamless connectivity with various audio and video components. Its seven-channel outputs facilitate the connection of a complete surround sound system. Additionally, the RSP-1098 includes balanced XLR outputs, which minimize noise and signal degradation, making it ideal for high-end audio systems.

Another major highlight of the Rotel RSP-1098 is its extensive room correction technology. The built-in Auto Setup feature utilizes a microphone to analyze your room’s acoustics, automatically adjusting settings for optimal sound. This ensures that you achieve the best audio performance regardless of your room’s characteristics.

The processor also features a user-friendly interface with an intuitive on-screen display, making it easy to navigate through settings and configurations. Equipped with a comprehensive remote control, the RSP-1098 allows you to take command of your home theater experience from the comfort of your seat.

In terms of build quality, Rotel is known for its commitment to excellence. The RSP-1098 features a robust chassis that minimizes vibrations, ensuring that the audio performance remains unadulterated. The elegant design, combined with high-quality components, resonates with the brand's dedication to achieving top-tier sound.

Overall, the Rotel RSP-1098 remains a significant player in the high-end audio segment, delivering exceptional performance, advanced technologies, and an impressive range of features. For those seeking an enriching home theater experience, the RSP-1098 stands out as a worthy investment that promises to elevate your audiovisual enjoyment to new heights.
Top Page Image Contents