Rotel RSP-1098 Mute Button, Function Knob, Path Button, Speaker Button, Mode Button, Enter Button

Page 19

MUTE Button

Push the MUTE button once to turn the sound off. An indication appears in the front panel and on-screen displays. Press the button again to restore previous volume levels.

NOTE: Rotating the volume knob also cancels the muting function.

FUNCTION Knob

The large knob at the left side of the front panel is dual action control for navigating OSD menus. Rotate the control to the left or right to change settings on the menus. Push the knob to enter the new setting.

PATH Button

The RSP-1098 can independently select sources for listening, recording, and use in a remote Zone 2 location. The PATH button toggles among listening, recording, and Zone 2 se- lection modes. In listening mode, input selec- tion and volume adjustments change the main listening room. In Zone 2 mode, these adjust- ments change the remote zone. In recording (or Zone 3) mode, a source is selected for output to VCRs or other recorders.

SPEAKER Button

During the setup of the RSP-1098, precise volume levels adjustments for each speaker are memorized for the proper playback of Dolby Digital and other surround sound for- mats. These default settings will be used each time you turn on the RSP-1098. The SPEAKER button on the front panel selects a speaker for temporary adjustments that remain in effect only until you change to a different input source or turn the RSP-1098 off. The actual adjust- ment is made with the FUNCTION knob.

The SPEAKER button can also be used to make a temporary adjustment to the group delay or “lip-synch” delay. Like the speaker settings, this is a temporary adjustment that overrides the permanent default setting for a video source until a different input source is selected or the unit is turned off.

19

MODE Button

Although surround mode selection is gener- ally automatic, the MODE button on the front panel can be used (with the FUNCTION knob) to temporarily override the default surround mode for a particular input. The available op- tions depend on the type of source input (digital or analog) and the type of recording (Dolby Digital, DTS, PCM stereo, etc.)

Remote Sensor

This sensor receives IR signals from the remote control. Do not block this sensor.

ZONE 2 LED

A small LED in the upper left portion of the front panel lights when the remote ZONE 2 feature of the RSP-1098 is in use.

Remote Control Overview

The RSP-1098 includes a full-function learning remote control that can operate the RSP-1098 plus nine other audio/video components.

A separate manual gives detailed instructions on programming and using the RR-1050 to replace all of the remote controls in your sys- tem. The RR-1050 manual covers many extra features (such as custom labeling of remote buttons that appear in its LCD display). To avoid duplication, we provide only basic informa- tion about using the RR-1050 to operate the RSP-1098 in this manual.

Many of the RR-1050 functions duplicate the front panel controls. For that reason, we cover the controls on the remote under appropriate topics throughout this manual. Letters in gray boxes next to the name of a function refers to the labeled illustration of the remote at the front of this manual.

Using the RR-1050

AUDIO Button

To operate the RSP-1098 with the remote, make sure that the AUDIO mode is active by press- ing the AUD button on the remote before you start. If one of the other buttons (CD, TAPE, etc.) is pressed, the remote will control another component, not the RSP-1098. The AUDIO mode will stay active until another DEVICE/ INPUT button is pressed.

English

Programming the RR-1050 PRELOAD Button

The RR-1050 is programmed at the factory to operate the RSP-1098. Should the AUDIO command set on your RR-1050 not operate the RSP-1098, the programming may have been inadvertently changed. To restore the RSP-1098 programming, press the recessed PRELOAD button on the remote with the tip of a ballpoint pen.

NOTE: Pushing the PRELOAD button will erase all custom programming and learned com- mands, restoring the RR-1050 to its factory condition.

MENU/OSD button

Push this button on the remote to turn on the OSD menu system. If the menu system is al- ready visible, push this button to cancel the display.

The front panel TFT display can be turned off by pressing and holding the MENU/OSD button on the remote for three seconds. Briefly press the MENU/OSD button again to turn the display back on. The display also turns back on whenever the STANDBY button on the front panel or remote is pressed.

ENTER Button

The ENTER button is used to confirm and memorize various settings in the setup and operation of the RSP-1098. Its use is described in detail in the relevant sections.

ON/OFF Buttons

The power ON and OFF buttons on the re- mote provide discrete ON and OFF commands to activate the unit or put it in standby mode. The rear panel master POWER switch must be in the ON position for the remote standby function to operate.

POWER Button

The POWER button on the remote provides the same basic function as the ON/OFF but- tons, except in a conventional toggle format. Press the button once to activate the unit; press again to put the unit into standby mode.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RSP-1098 Page FCC Information Important Safety InstructionsFront and Rear Panels RSP-1098Surround Sound ProcessorRR-1050 Remote EnglishOn-Screen Display/TFT Screen Menus DelayAmplifiersubwoofer OutputsDVD Source ConnectionsRotel RSP-1098 Zone 2 ConnectionsContents Menu Basics SpecificationsOther features Surround featuresVideo features Audio featuresTuner Inputs PlacementUnpacking CD InputsZone 2 Audio Outputs Video 1-5 Audio Inputs Preamp OutputsVideo 1-3 Audio Outputs Multi InputsDigital Audio Input & Outputs Other Connections AM/FM Tuner CD PlayerDVD Player Cable, Satellite, or Hdtv TunerFront Panel Overview Mute Button Mode ButtonUsing the RR-1050 Audio Button Power ButtonBasic Operations To select a source for Listening Volume AdjustmentsSelecting Inputs Display OptionsDolby Digital Overview Surround FormatsSelecting a Source from the Remote Dolby Surround Dolby Pro Logic2Ch/5Ch/7Ch Stereo Formats DTS Neo67.1 Surround DSP Music ModesManually Selecting Surround Modes ModesOther Digital Formats DTS DTS 96/24 DTS-ES Dolby Digital Dolby Digital Surround EXDigital Stereo PCM, MP3, and Hdcd Mpeg MultichannelAnalog Stereo Temporary Speaker Level Other SettingsTemporary Group Delay Contour/Tone SettingsControlling Zone 2 from the Front Panel Zone 2 Power On/Off OperationZone 2 Operation Cinema EQNavigation Buttons Menu BasicsSystem Status Input Setup Configuring InputsMain Menu Multi Input Setup Understanding Speaker Configuration Configuring Speakers and AudioCenter Back Speakers large1 Speaker SetupCenter Speakers large/small Surround Speakers large/smallCrossover 40Hz/60Hz/80Hz Advance Speaker SetupSubwoofer Setup Crossover 40Hz/60Hz/80Hz/ 100Hz/120Hz/150Hz/200Hz/OFFCalibration with an SPL meter Test ToneSpeaker front/center/surround/cen Delay SetupContour Setup Other OptionsDefault Setup Zone 2 SetupTo restore the Factory Default set Troubleshooting General SpecificationsAudio VideoRotel Europe Rotel of AmericaRotel Deutschland

RSP-1098 specifications

The Rotel RSP-1098 is a remarkable surround sound processor that has set a high standard in the realm of home theater systems. Designed for audiophiles and movie enthusiasts alike, the RSP-1098 embodies innovative technology and high-performance audio processing.

One of the standout features of the RSP-1098 is its advanced digital signal processing capabilities. This processor utilizes a 24-bit/192kHz DAC, allowing for incredibly precise audio reproduction that enhances the listening experience. The RSP-1098 supports a variety of audio formats, including Dolby Digital, DTS, and PCM, making it versatile enough for any media format you may encounter.

The unit provides multiple inputs and outputs, ensuring seamless connectivity with various audio and video components. Its seven-channel outputs facilitate the connection of a complete surround sound system. Additionally, the RSP-1098 includes balanced XLR outputs, which minimize noise and signal degradation, making it ideal for high-end audio systems.

Another major highlight of the Rotel RSP-1098 is its extensive room correction technology. The built-in Auto Setup feature utilizes a microphone to analyze your room’s acoustics, automatically adjusting settings for optimal sound. This ensures that you achieve the best audio performance regardless of your room’s characteristics.

The processor also features a user-friendly interface with an intuitive on-screen display, making it easy to navigate through settings and configurations. Equipped with a comprehensive remote control, the RSP-1098 allows you to take command of your home theater experience from the comfort of your seat.

In terms of build quality, Rotel is known for its commitment to excellence. The RSP-1098 features a robust chassis that minimizes vibrations, ensuring that the audio performance remains unadulterated. The elegant design, combined with high-quality components, resonates with the brand's dedication to achieving top-tier sound.

Overall, the Rotel RSP-1098 remains a significant player in the high-end audio segment, delivering exceptional performance, advanced technologies, and an impressive range of features. For those seeking an enriching home theater experience, the RSP-1098 stands out as a worthy investment that promises to elevate your audiovisual enjoyment to new heights.
Top Page Image Contents