Rotel RSP-1098 owner manual Mpeg Multichannel, Digital Stereo PCM, MP3, and Hdcd, Analog Stereo

Page 26

RSP-1098Surround Sound Processor

26

Rotel XS center back processing. On the front panel, press the MODE button while playing a DTS or DTS 96/24 source. Then, rotate the FUNCTION knob to step through the same options.

•On a 6.1/7.1 system with a DTS- ES disc. Press the SUR+ button on the re- mote, then use the +/– buttons to step through two options: DTS 2.0 channel downmix or DTS-ES 6.1ch/7.1ch playback. On the front panel, press the MODE but- ton while playing a DTS source. Then, ro- tate the FUNCTION knob to step through the same options.

MPEG Multichannel

MPEG decoding is auto-detected and cannot be overridden. You may, however, select a 2 channel downmix of 5.1 channel recordings. If the system is configured with center back speaker(s), you can also force Rotel XS pro- cessing on or off.

NOTE: In addition to the options that follow, you can press the 2CH button on the remote to toggle between 2-channel downmix and multichannel playback.

•On a 5.1 system. Press the SUR+ but- ton on the remote, then press the +/– but- tons to change between MPEG 5.1 chan- nel or MPEG 2.0 channel downmix play- back. On the front panel, press the MODE button once, then rotate the FUNCTION knob to select 2.0 or 5.1 channel playback.

•On a 6.1/7.1 system with an MPEG 5.1 disc. Press the SUR+ button on the remote, then use the +/– buttons to step through three options: MPEG 5.1 channel, MPEG 2.0 channel downmix, or MPEG with Rotel XS center back processing. On the front panel, press the MODE button while playing an MPEG Multichannel source. Then, rotate the FUNCTION knob to step through the same options.

Digital Stereo

(PCM, MP3, and HDCD)

This group of recordings includes any non-Dolby Digital 2-channel signal from the RSP-1098’s digital inputs. You can play these recordings in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH Stereo modes. You can also use Dolby Pro Logic II surround, DTS Neo:6 surround, or one of the MUSIC 1-4 DSP modes.

All of the bass management settings (speaker size, subwoofer, and crossover) are in effect with digital stereo inputs.

NOTE: In addition to the options that follow, you can select 2-channel, Pro Logic II Cin- ema, Pro Logic II Music, 5-channel stereo, or 7-channel stereo by pressing one of the sur- round mode buttons on the remote (2CH, PLC, PLM, 5CH, 7CH).

•To select STEREO mode for 2-chan- nel digital recordings. Press the 2CH button on the remote.

•To select any other mode for 2-chan- nel digital recordings. Repeatedly press SUR+ button on the remote until the desired mode is displayed. On the front panel, press the MODE button once, then rotate the FUNCTION knob to select the desired mode (including STEREO).

•Select the Cinema, Music, or Emu- lation option in Pro Logic II mode. Press the +/– buttons on the remote to toggle select the desired option. On the front panel, press the MODE button twice while in Pro Logic II mode. Then, rotate the FUNCTION knob to select the option.

•Select the Cinema or Music option in Neo:6 mode. Press the +/– buttons on the remote to toggle select the desired option. On the front panel, press the MODE button twice while in Neo:6 mode. Then, rotate the FUNCTION knob to select the option.

routed directly to the volume control and the outputs. It is pure 2-channel stereo, bypass- ing all of the digital circuitry. None of the bass management features, speaker level settings, contour settings, or delay settings are active. There is no subwoofer output. A full-range signal is sent directly to two speakers.

The other option converts the analog inputs to digital signals, passing them through the digital processors in the RSP-1098. This op- tion allows all of the features to be active in- cluding bass management settings, crossovers, subwoofer outputs, contour settings, etc. In this mode, you can select several surround modes including 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH Stereo modes. You can also use Dolby Pro Logic II surround, DTS Neo:6 sur- round, or one of the MUSIC 1-4 DSP modes.

NOTE: In addition to the options that follow, you can select Pro Logic II Cinema, Pro Logic

IIMusic, 5-channel stereo, or 7-channel ste- reo by pressing one of the surround mode buttons on the remote (PLC, PLM, 5CH, 7CH).

• To select Stereo or Analog bypass

mode for 2-channel analog record-

ings. Press the 2CH button on the remote

to toggle between Stereo (with digital pro-

cessing) or Analog Bypass (no digital pro-

cessing) modes.

• To select other modes for 2-chan-

nel analog recordings. Repeatedly

press SUR+ button on the remote until the

desired mode is displayed. On the front

panel, press the MODE button once, then

rotate the FUNCTION knob to select the

desired mode (including Stereo and Ana-

log Bypass).

• Select the Cinema, Music, or Emu-

lation option in Pro Logic II mode.

Press the +/– buttons on the remote to toggle

select the desired option. On the front panel,

press the MODE button twice while in Pro

Logic II mode. Then, rotate the FUNCTION

knob to select the option.

Analog Stereo

This type of recording includes any conven- tional stereo signal from the RSP-1098’s ana- log inputs, including analog audio from CD players, FM tuners, VCRs, tape decks, etc.

Analog stereo inputs require a fundamental choice about how the signal is routed through the RSP-1098. One option is the analog by- pass mode. In this mode, the stereo signal is

• Select the Cinema or Music option

in Neo:6 mode: Press the +/– buttons

on the remote to toggle select the desired

option. On the front panel, press the MODE

button twice while in Neo:6 mode. Then,

rotate the FUNCTION knob to select the

option.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents RSP-1098 Page Important Safety Instructions FCC InformationRSP-1098Surround Sound Processor Front and Rear PanelsEnglish RR-1050 RemoteDelay On-Screen Display/TFT Screen MenusOutputs AmplifiersubwooferSource Connections DVDZone 2 Connections Rotel RSP-1098Contents Specifications Menu BasicsAudio features Surround featuresVideo features Other featuresCD Inputs PlacementUnpacking Tuner InputsMulti Inputs Video 1-5 Audio Inputs Preamp OutputsVideo 1-3 Audio Outputs Zone 2 Audio OutputsDigital Audio Input & Outputs Other Connections Cable, Satellite, or Hdtv Tuner CD PlayerDVD Player AM/FM TunerFront Panel Overview Power Button Mode ButtonUsing the RR-1050 Audio Button Mute ButtonBasic Operations Display Options Volume AdjustmentsSelecting Inputs To select a source for ListeningDolby Surround Dolby Pro Logic Overview Surround FormatsSelecting a Source from the Remote Dolby DigitalDSP Music Modes DTS Neo67.1 Surround 2Ch/5Ch/7Ch Stereo FormatsOther Digital Formats ModesManually Selecting Surround Modes Dolby Digital Dolby Digital Surround EX DTS DTS 96/24 DTS-ESAnalog Stereo Mpeg MultichannelDigital Stereo PCM, MP3, and Hdcd Contour/Tone Settings Other SettingsTemporary Group Delay Temporary Speaker LevelCinema EQ Zone 2 Power On/Off OperationZone 2 Operation Controlling Zone 2 from the Front PanelSystem Status Menu BasicsNavigation Buttons Main Menu Configuring InputsInput Setup Multi Input Setup Configuring Speakers and Audio Understanding Speaker ConfigurationSurround Speakers large/small Speaker SetupCenter Speakers large/small Center Back Speakers large1Crossover 40Hz/60Hz/80Hz/ 100Hz/120Hz/150Hz/200Hz/OFF Advance Speaker SetupSubwoofer Setup Crossover 40Hz/60Hz/80HzTest Tone Calibration with an SPL meterOther Options Delay SetupContour Setup Speaker front/center/surround/cenTo restore the Factory Default set Zone 2 SetupDefault Setup Troubleshooting Video SpecificationsAudio GeneralRotel Deutschland Rotel of AmericaRotel Europe

RSP-1098 specifications

The Rotel RSP-1098 is a remarkable surround sound processor that has set a high standard in the realm of home theater systems. Designed for audiophiles and movie enthusiasts alike, the RSP-1098 embodies innovative technology and high-performance audio processing.

One of the standout features of the RSP-1098 is its advanced digital signal processing capabilities. This processor utilizes a 24-bit/192kHz DAC, allowing for incredibly precise audio reproduction that enhances the listening experience. The RSP-1098 supports a variety of audio formats, including Dolby Digital, DTS, and PCM, making it versatile enough for any media format you may encounter.

The unit provides multiple inputs and outputs, ensuring seamless connectivity with various audio and video components. Its seven-channel outputs facilitate the connection of a complete surround sound system. Additionally, the RSP-1098 includes balanced XLR outputs, which minimize noise and signal degradation, making it ideal for high-end audio systems.

Another major highlight of the Rotel RSP-1098 is its extensive room correction technology. The built-in Auto Setup feature utilizes a microphone to analyze your room’s acoustics, automatically adjusting settings for optimal sound. This ensures that you achieve the best audio performance regardless of your room’s characteristics.

The processor also features a user-friendly interface with an intuitive on-screen display, making it easy to navigate through settings and configurations. Equipped with a comprehensive remote control, the RSP-1098 allows you to take command of your home theater experience from the comfort of your seat.

In terms of build quality, Rotel is known for its commitment to excellence. The RSP-1098 features a robust chassis that minimizes vibrations, ensuring that the audio performance remains unadulterated. The elegant design, combined with high-quality components, resonates with the brand's dedication to achieving top-tier sound.

Overall, the Rotel RSP-1098 remains a significant player in the high-end audio segment, delivering exceptional performance, advanced technologies, and an impressive range of features. For those seeking an enriching home theater experience, the RSP-1098 stands out as a worthy investment that promises to elevate your audiovisual enjoyment to new heights.
Top Page Image Contents