TEMPERATURE
The "Temperature Controlled Meat Cooking Guide" and "Reheating Guide" on Pages 17 and 18 will show you which
temperature control settings, the timer is not used.
I. Place the temperature probe into the food with the first inch of the sensor in the center of the food. The
probe should be in a level direction or on an angle as shown. It should not be put in from the top.
NOTE: It is not necessary to touch POWER CONTROL when you are cooking with "HI (MAX POWER)."
However, if you touch POWER CONTROL the light above POWER will go on and the word "HI" will show in
the display window. This is to remind you that the oven will work at "HI (MAX POWER)" unless a different
power setting is chosen.
2. Plug the temperature probe into the socket on the side of the oven.
CAUTION: Do not plug the pointed end of the temperature
probe into the socket.
6.Touch START. The oven will begin to cook and you will be able to see the temperature of the food rising in the display window once it exceeds 115°F. A tone will sound for one
second when the desired temp- erature is reached.
EE3CDCE3 r-_ r-_ r-_ _r_r__
m_ar
•,M,w
3.Touch CLEAR.
4.Touch TEMP CONTROL. The
lights above TEMP and below COOK I will go on, and "F" will show in the display window.
5.Choose the food temperature and touch the corresponding numbers. For example, if the recipe calls for doneness at 120°F, you would touch the
numbers "1," "2" and "0." When you touch "120" the
display window will show
"120F." If the temperature probe is not plugged into the socket, the probe light will flash and the oven will not work.
r_3 EE3r_-_ m_mr'_ EiE]r"_Ci£] EE3EiE3CD r_--3ElmB _EE3_-3
. The oven will switch into "Hold Warm" to keep the food warm. "Hold" will show in the display window. The power control set- ting changes to Power Level 1. To check the temperature being held, touch TEMP CON-
TROL. The "holding" temp- erature will show in the display window. The "Hold Warm" will continue for 60 minutes after the food reaches the chosen
temperature or until the door has been opened or until STOP has been touched. If the door is
opened, the "Hold Warm" will stop. To reset, simply touch TEMP CONTROL, the corre- sponding numbers and START.
NOTE: The highest temperature that can be set is 185°F.
r'_cE3ri_
_
w
•
19