Kenmore 790.4659 Control Pad Functions, For a silent control panel, Temperature conversion, Bake

Control Pad Functions

Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

CLOCK SET	COOK TIME			UP and DOWN ARROW PADS— Used			BAKE PAD—			FEATURE INDICATOR
PAD— Used	PAD— Used to			along with the function pads to select oven			Used to select the			LIGHTS— These light to
to set the	enter the length of			temperature, cook time, start time (when			bake function.			show which feature is in
time of day.	the baking time.			programming an automatic start time), time						use.
				of day, clean time and minute timer.							BROIL PAD—
OVEN INTERIOR											Used to select the
											variable broil
LIGHT PAD—
											function.
Used to turn oven
interior light ON or
OFF.					Cook			Bake	Broil		WARM & HOLD
											PAD— Used to set
					Time
											the Warm & Hold
						Oven					feature.
SELECT CLEAN
						Preheat
PAD— Used to		Select	Timer		Delay		STOP		Warm &		STOP/CLEAR
						Door Locked
select the Self-		Clean	Set/Off		Start		Clear		Hold		PAD— Used to
Cleaning cycle. A 2,								Oven			clear any function
3 or 4 hour Self-							3 Lockout				previously entered
Clean time may be											except the time of
selected.											day and minute
											timer. Press STOP/
TIMER SET/OFF PAD—		DELAY START			OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN"						CLEAR to stop
Used to set or cancel the		PAD— Used to set			light will glow each time the oven turns on to maintain the set oven						cooking. Also the
minute timer. The minute		the desired start			temperature. The "PREHEAT" light will glow when the oven is first						STOP/CLEAR pad
timer does not start or stop		time for baking &			set to operate, or if the desired temperature is reset higher than the						is used to activate
cooking. Also,		Self-Clean. May be			actual oven temperature. The "DOOR LOCKED" light will flash						oven door lockout
TIMER SET/OFF pad is		used with COOK			when the oven door locks and unlocks or when using the Self-Clean						setting.
		TIME to program a cycle or when the oven door lockout is activated. The indicator light
used to set the Continuous
		delayed bake			will glow constantly after the door locks.
Bake feature.

cycle.

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven has reached the set temperature.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for

silent operation. Press and hold DelayStart . After 7 seconds, the control will beep once. This will block the controls from

sounding when a pad is pressed. To return to normal sound operation, press and hold DelayStart again for 7 seconds until the

control beeps once.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press Broil . "— —" appears in the display.

2.Press and hold the until "HI" appears in the display.

3.Press and hold Broil until °F or °C appears in the display.

4.Press the or to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

12