Kenmore 790.9031 manual Setting Oven Controls, Changing temperature display F or C

Page 13

Setting Oven Controls

Changing temperature display (°F or °C)

The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The display may be changed to show either Fahrenheit or Celsius oven temperatures.

To change temperature display made from °F to °C (Celsius) or from °C to °F (Fahrenheit):

1.Press Broil key pad. ---- appears in the display.

2.Press and hold A until HI appears in display.

3.Press and hold Broil key pad until F or C appears in the display.

4.Press either A or V key pad to toggle between F (Fahrenheit) or C (Celsius) mode choices. Release key pad when desired mode is displayed.

5.To accept selection, press any control key pad once. The display will return to the time of day.

Important note:

The temperature display mode cannot be changed when the oven is set for cooking or Select Clean is active.

Changing between continuous bake setting or

12-Hour Energy Saving feature

The oven control has a factory preset 12-Hour Energy

Saving feature that will turn the oven off automatically if the oven is left on for more than 12 hours. The control may

be programmed to override this feature to continuously baize.

To change to continuous bake mode:

Press and hold Timer Set/Off key pad until the control beeps once (about 6 seconds). - - hr will appear in display indicating the control is now set for continuous baize setting.

To change to 12=Hour Energy Saving feature:

Press and hold Timer Set/Off key pad until the control beeps once (about 6 seconds). 12hr will now appear in display indicating the control is set for 12-Hour Energy Saving feature.

Important note:

Changing between continuous bake or the 12-Hour Energy saving mode does not change how the cooktop controls

operate.

Setting Timer

The timer allows you to track your cooking times without interferring the cooking process. The timer may be set from I minute up to 11 hours and 59 minutes.

To set the timer:

1.Press Timer Set/Off key pad.

2.Press the A to increase the time in one minute

increments. Press and hold A to increase the time in

10 minute increments. Release A when the desired time appears in the display. The timer wiii begin to count down.

3.When the set time has run out, the Timer will sound with 3 beeps and will continue to beep 3 times every 60 seconds until Timer Set/Off key pad is pressed.

To change flme remaining in Timer:

While the timer is active, press and hold the A or V key pad to increase or decrease any time remaining.

To cancel the Timer before the set flme has run out: Press Timer Set/Off key pad once.

Important notes:

*The timer does not start or stop the cooking process. It serves as an extra timer in the kitchen that will beep when the set time has run out. The timer may be used alone or when any other oven function is active.

"The indicator light located above the Timer Set/Off key pad will glow when the timer is active.

The timer wiii display hours and minutes until 1 hour

remains. When less than 1 hour remains, the display wiii count down in minutes and seconds. Once the timer has

less than 1 minute remaining only seconds will display.

If the timer is active when oven cooking, the minute timer will show in the display by default. To view information

of any other active oven function, press the key pad once for the active function to view status.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Ien Limited Warranty ContentsDefinitions Install anti=tlp device packed with rangeSave these instructions for future reference Result in injury Important Safety Notice Important Instructions for Using Your OvenSave these instructions for future reference IMPORTANT iNSTRUCTiONS for Using Your COiL Cook TOP ModelsSerial Plate Location IMPORTANT iNSTRUCTiONS for CleaningIMPORTANT iNSTRUCTiONS for Self Types of oven racks Removing, replacing and arranging racksAir circulation in the oven Oven vent locationUsing proper cookware Before Setting Surface ControlsAbout the surface elements Element On indicator lightsHome Canning Surface element settings Setting Surface ControlsTo operate Simmer Select element Simmer Select ElementSetting Clock Setting Oven ControSetting silent or audible control mode Changing temperature display F or C Setting Oven ControlsTo cancel Oven Lockout feature Setting BakeIndicator Operating oven light on some modelsShut off automatically Setting Cook TimeSetting Delay Start 3SOF Convec. BakeSuggestions for Convec. Bake OvenOven interior BroilWarm & Hold TM AdjustingOven FemperatureRead before starting Select Clean Select CleanSetting Select Clean Accessories from Oven Cavity to avoid damageWhen Select Clean is finished Delayed Start Select CleanTo set Delay Start Select Clean Cleaning Recommendation Care CleaningRecommendation General Cleaning Care & CleaningCleaning oven bottom on some models Aluminum foil and utensilsSurface elements and drip bowls Cleaning drip bawlsTo remove the surface elements and drip bowls To replace drip bowls and surface elementsRaising and lowering the cooktop some models WireReplacing oven light some models To raise and lower the cooktopSpecial door care instructions Removing and replacing the lift-offoven doorProblem To common problemsSolution Before You Call SobfionsProblemSolution Before You Call Sobfions to common problemsBefore You Call * Solutions to common problems Page Sears Installation Service Maintenance CheckMaster Protection Agreements Parts Labor
Top Page Image Contents