DOOR ALIGNMENT
Before adjust the doors, remove the base grille. See BASE
GRILLE INSTALLATION for reference.
First select your adjusting tool, it could vary.
Type 1
Adjusting tool: fiat blade screwdriver
If the freezer compartment door is lower than the refrigerator
compartment door, level them by inserting a flat blade
screwdriver into the groove of the left leveling leg and rotating it clockwise.
Left leveling
legHeight difference
Type 2
Adjusting tools: wrench s/16"(8 ram] and wrench 3.4" (19 ram)
Height difference
)I...........................
Keeper nut
Wrench
Adj!
hinge;_w__"--F
Using a 3_" (19 mm) wrench, turn the keeper nut clockwise to loosen the keeper nut. Using a s/1J' (8 mm) wrench, turn the
adjustment hinge pin clockwise or counterclockwise to level
the refrigerator and freezer door.
After setting the level door, turn the keeper nut
counterclockwise to tighten.
• /
If the freezer compartment door is higher than the refrigerator compartment door, level them by inserting a flat blade screwdriver into the groove of the right leveling leg and rotating it clockwise.
[] CAUTION: Do not overtight the door adjustment screw. The hinge pin can be pulled out. (Adjustable range of height is a maximum of 1/2" (12.7 ram)).
AFTER LEVELING THE DOOR HEIGHT
Make sure the front leveling legs are completely touching the floor.
Height
Right leveling leg
difference
:J
12