Water and ICE Dispenser, ICE Storage BIN

WATER AND ICE DISPENSER

Your refrigerator has a mechanism that can dispense cool water and ice cubes without opening the door.

°The tray can easily be removed by pressing down and lifting it out.

°First push the tray in the area labeled 'PUSH',then place your finger in the center hole and lift up to remove the tray.

The ice bin stores the ice cubes made by the icemaken If you need to remove the ice storage bin, do so as follows.

NOTE: Use both hands to remove the ice bin to avoid

dropping it. If the ice bin does not slide into place easily, twist the drive device slightly.

°Hold the ice storage bin as shown in the left figure lift it @ while slightly pulling it out @.

°To assemble the ice storage bin, lift it (3) while slightly pushing it in @.

Ll_ WARNING: Do not put your hands into the water and ice

dispenser opening. Doing so may cause an injury to your hand.

CAUTION: When using the dispenser with a container with a small opening, place the container as close to the top as possible.

°The dispenser has the following dimensions: Depth 4 _?' (124 mm)

Width 6 z,/d'(175 mm) Height 9 _d'(238 mm)

We suggest you use a container that is within the specifications for better performance.

@. If not, rotate the auger drive in the direction shown by the

arrow until the bin is fully engaged into the auger drive.

NOTE: Make sure the bin is fully engaged into the auger drive

If you need access to the icemaker, follow these steps:

• Lift the ice shelf @ and pull it out @.

Your refrigerator and freezer features racks which can easily be arranged for packaged products.

°Lift the door rack holding both sides @ and puii it out in @ direction.