Handle Removal Type, EJectrlc Shock Hazard, Some

HANDLE REMOVAL (TYPE 2)

•Grasp the handle tightly with both hands and slide the

handle up

(this may

require some force).

EJectrlc Shock Hazard

° The keyhole

slots _

the back

of the handle allow the

* Disconnect electrical supply to the refrigerator before

handle to separate from the mounting screws Q.

installing.

Failure

do so could

result in death or serious

° Then puii the handle towards you.

injury.

CAUTION: Use extreme

care

to prevent damage if using a

° Do not put your hands or feet or other objects into the air

vents° base griiler

bottom of

the refrigerator.

rubber

mallet

to remove

the handles.

CAUTION:

may

take

some

force to assemble or

° Be careful

when

you

work with the hinger base grille and

dissemble

the

handles.

stopper. You may

be injured.

REMOVING AND REPLACING REFRIGERATOR DOORS

Before removing the doors r remove the base grille. See BASE

GRILLE INSTALLATION

for reference.

(_	Keyhole	slots_
Screws	on back	of /> L_
mounted	handle	/
on door	handle	/
on door		/
		/

1. Open the door. Remove the top hinge cover screw (1). 2.Use a fiat blade screwdriver to pry back the hooks (not

shown) on the cabinet underside of the cover (2). Lift up the cover.

3. Rotate the hinge lever (3) clod<wise. Lift the top hinge (4) free of the hinge lever latch (5).

NOTE: Regardless of hinge lever type r removal process is the same.

4.Lift the door from the lower hinge pin.

5. Place the door, inside facing up, on a non scratching surface.

_'_ CAUTION: When lifting the hinge free of the latch, be careful that the door does not fall forward.