REMOVING AND REPLACING
REFRIGERATOR DOORS
Excessive Weight Hazard:
Use two or more people to remove and install the refrigerator doors. Failure to do so can result in back or other injury.
,_, CAUTION: Before you begin, remove food and bins from the doors.
(2)
(3).
(8)
Electrical Shock Hazard
Disconnect the electrical supply to the refrigerator before installing. Failure to do so could result in serious injury or death.
Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. You may be injured or receive an electrical shock.
To remove the left refrigerator door:
On the back of the refrigerator, pull the water tube out of the cotlet fitting on the connector by pressing the fitting release ring (see picture below).
1.Open the door. Remove the top hinge cover screw (1). Lift up the cover (2).
2.Remove the cover.
3.Pull out the tube (3).
4.Disconnect all wire harnesses (4).
5.Remove the grounding screw (5).
6.Rotate hinge lever (6) counterclockwise. Lift the top hinge (7) free of the hinge lever latch (8).
_, CAUTION: When lifting the hinge free of the latch, be careful that the door does not fall forward.
7.Lift the door from the middle hinge pin and remove the door.
8.Place the door, inside facing up, on a
To remove the right refrigerator door: f
1.Open the door. Remove the top hinge cover screw (1). Lift up the cover (2).
2.Remove the cover.
3.Rotate the hinge lever (3) clockwise. Lift the top hinge
(4)free of the hinge lever latch (5).
,A, CAUTION: When lifting the hinge free of the latch, be careful that the door does not fall forward.
4.Lift the door from the middle hinge pin and remove the door.
5.Place the door, inside facing up, on a
13