PULLOUT DRAWERS
Top Drawer
I. To remove, putt the drawer out to full extension. On
the left rail, use a fiat blade screwdriver to push in on the tab to release the drawer from the rail, as shown below. Once the left side is loose, push the tab on the right side with your finger to release the drawer. Lift the front of the drawer up, then putt it straight out.
2.To replace, slightly tilt up the front of the drawer, insert drawer into the frame, and push drawer back into place until you hear a click.
2.To replace, slightly tilt up the front of the drawer,
insert the drawer into the frame, and push it back into place.
DURABASE
1.To remove the Durabase, push it to the back as much as possible. Tilt up the front of the Durabase and putt straight out.
2.To replace, insert the Durabase in the rail assembly.
DURABASE DIVIDER
The Durabase divider allows you to organize the
Durabase area into sections. It can be adjusted from side
to side to accommodate items of different sizes.
Middle Drawer
1.To remove, putt the drawer out to full extension. Lift the front of the drawer up, then pull it straight out.
WARNING: If the Durabase divider is removed, there is enough open space for children or pets to crawl inside. To prevent accidental child and pet entrapment or suffocation risk, DO NOT allow children or pets to touch or go near the drawer.
28