Kenmore 795.7205 manual Parts & Features, Or sticky, Led

PARTS & FEATURES

Doors	will	not close	Food packages	are	blocking the door
correctly		or pop	open.
open.			Ice bin, crisper cover, pans, shelves,
			door bins, or baskets are out of
			position.
			The doors were removed during
			product installation and not properly
			replaced.
			Refrigerator is not leveled properly.
Doors	are	difficult to	The gaskets are	dirty	or sticky.
open.

Door was recently closed.

Refrigerator	wobbles	Leveling legs are			not adjusted
or seems unstable.		properly.
		Floor	is not	level.
Lights do not	work.	LED	interior	lighting failure.

Refrigerator has an	The Air Filter may	need to be set to
unusual odor.	the MAX setting or	replaced.

Rearrange food containers to clear the door and door shelves.

Push bins all the way in and put crisper cover, pans, shelves and baskets into their correct positions. See the Using Your Refrigerator section for more information.

Remove and replace the doors according to the Removing and Replacing Refrigerator Handles and Doors section.

See Door Alignment in the Refrigeration Installation section to level refrigerator.

Clean the gaskets and the surfaces that they touch. Rub a thin coat of appliance polish or kitchen wax on the gaskets after cleaning.

When you open the door, warmer air enters the refrigerator. As the warm air cools, it can create a vacuum. If the door is hard to open, wait one minute to allow the air pressure to equalize, then see if it opens more easily.

Refer to the Leveling and Door Alignment section.

it may be necessary to add shims under the leveling legs or rollers to complete installation.

The refrigerator compartment lamp is LED interior lighting, and service should be performed by

a qualified technician. Refer to the Light Bulb Replacement section.

Set the Air Filter to the MAX setting, if the odor does not go away within 24 hours, the filter may need to be replaced. See the Replacing the Air Filter section for replacement instructions.

45