Kenmore 795.7205 manual Adjusting Shelves Cantilever, Foldlng Shelf on some models

REFRIGERATORSHELVES

The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model may have glass or wire shelves.

Adjusting the shelves to fit different heights of items will make flnding the exact item you want easier. Doing so will also reduce the amount of time the refrigerator door is open which will save energy.

IMPORTANT: Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden temperature changes or impact.

_, CAUTION: Glass shelves are heavy. Use special care when removing them.

Adjusting Shelves (Cantilever)

Remove shelves from the shipping position and replace shelves in the position you want.

To remove a shelf--Tiltup the front of the shelf in the direction of C) and lift it in the direction of (_. Putt the shelf out.

To relnstall a shelf--Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. Then, lower the front of the shelf so that the hooks drop into the slots.

_, CAUTION: Make sure that shelves are level from one

side to the other. Failure to do so may result in the shelf falling or spilling food.

Foldlng Shelf (on some models)

You can store taller items, such as a gallon container

or bottles, by simply pushing the front half of the shelf

underneath the back half of the shelf. Putt the front of the

shelf toward you to return to a full shelf.

25