Kenmore 795.755564 General Cleaning Tips, Outside, Door Liners and Gaskets, Condenser Coils

Page 24

Explosion Hazard

Use non-flammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freeler sections defrost automatically. However, clean both sections about once a month to prevent odors. Wipe up spills immediately.

GENERAL CLEANING TIPS

•Unplug refrigerator or disconnect power.

•Remove all removable parts, such as shelves, crispers, etc. Refer to sections in Using Your Refrigerator for removal instructions.

•Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners.

•Hand wash, rinse and dry all surfaces thoroughly.

•Plug in refrigerator or reconnect power.

OUTSIDE

Waxing external painted metal surfaces helps provide rust protection. Do not wax plastic parts. Wax painted metal surfaces at least twice a year using appliance wax (or auto paste wax). Apply wax with a clean, soft cloth.

For products with a stainless steel exterior, use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth.

INSIDE WALLS (allow freezer to warm up so cloth won't stick)

To help remove odors, you can wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tablespoons baking soda to 1 quart of water (26 g soda to 1 liter water.) Be sure the baking soda is completely dissolved so does it not scratch the surfaces of the refrigerator.

&CAUTION: While cleaning the inside, do not spray water.

DOOR LINERS AND GASKETS

Do not use cleaning waxes, concentrated detergents, bleaches, or cleaners containing petroleum on plastic refrigerator parts.

PLASTIC PARTS (covers and panels)

Do not use window sprays, abrasive cleansers, or flammable fluids. These can scratch or damage the material.

CONDENSER COILS

Remove base cover. (See the base cover section on page 13.) Use a vacuum cleaner with an extended attachment to clean condenser coils.

Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month.

Replace base cover.

LIGHT BULB REPLACEMENT

Electrical Shock Hazard

Before replacing a burned-out light bulb, either unplug the refrigerator or turn off power at the circuit breaker or fuse box.

NOTE: Moving the control to the OFF position does not remove power to the light circuit.

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage.

To change Refrigerator Light Bulbs:

1.Unplug Refrigerator, or disconnect power at the circuit breaker.

2.If necessary, remove top shelf or shelves.

3.Using a flat instrument, gently pry the lamp cover loose in the front as shown. Rotate downward to remove rear tabs.

4.Make sure the bulbs are cool to the touch.

Turn bulbs counterclockwise to remove. Insert new bulb(s).

5.Assemble in reverse order by snapping the Lamp Cover in, engaging the rear tabs followed by the front tabs.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Refrigerator Ownersmanual Refrigerator Features Freezer FeaturesU.S.A Master Protection Agreements For prices and additional information callPage To Connect Electricity Recommended Grounding MethodBefore YOU Throw Away Your OLD Refrigerator Or Freezer USE of Extension CordsLight p.24 OPull Installation When Moving Your RefrigeratorUnpacking Your Refrigerator NextHOW to Remove DOOR/DRAWER Handles Removing Refrigerator HandleMounted on door Keyhole slots on back of handle Removing Freezer Drawer HandleHOW to Replace DOOR/DRAWER Handles Replacing Refrigerator Door HandleScrews mounted on door Replacing Freezer Drawer Handle Screws mounted on door On back of handleRemoving and Replacing Refrigerator Doors Removing Refrigerator DoorReplacing Refrigerator Door Right Door CorrectIncorrectHOW to Remove and Install the Pullout Drawer Removing Pullout DrawerLeveling and Door Alignment LevelingTo remove the base cover Door AlignmentSetting the Controls Ensuring Proper AIR CirculationAdjusting Control Settings Food Storage GuideStoring Frozen Food Water DispenserPackaging recommendations Refrigerator Shelves Wine Holder 795.7555* Model OnlySuprafresh Crispers with TILT-OUT Compartment CrisperControl Crisper Cover with Lattice on Inner Surface Crispers with rails To remove crisperTo replace crisper To remove latticeGlide N Serve Modular Door BINControls To replace Glide N ServeDairy BIN EGG BOXTilting Door ICE BINTILT-OUT Door Basket Durabase DividerDurabase Pull OUT DrawerWater Filter Replace with a new cartridgeGeneral Cleaning Tips Light Bulb ReplacementOutside Door Liners and GasketsPower Interruptions When YOU GO on VacationWhen YOU should SET the Icemaker Power Switch to O OFF Operation InstructionsNormal Soundsyou MAY Hear Preparing for VacationPower drill Before YOU BeginChoosethe Valvelocation Fasten the Shutoff Valve Tighten the Pipe ClampConnect the Tubing to the Valve Flush OUT the TubingConnect the Tubing to RefrigeratorPlug in the Refrigerator Start the IcemakerUnderstanding Sounds YOU MAY Hear Refrigerator does not OperateVibration or Rattling Noise Lights do not WorkCompressor Motor Seems to RUN TOO Much Doors will not Close CompletelyFrost or ICE Crystals on Frozen Food Check ThenICE has OFF-TASTE or Odor There is Water in the Defrost Drain PANRefrigerator Seems to Make TOO Much Noise Cubes Produced by Icemaker are TOO SmallCheck if Then

795.755564, 795.755534, 795.755524, 795.755544, 795.755594 specifications

The Kenmore line of refrigerators, specifically models 795.755594, 795.755544, 795.755524, 795.755534, and 795.755564, represents a commitment to quality, efficiency, and innovative design in home refrigeration. These models are crafted to meet the needs of modern households, offering ample storage, advanced cooling technologies, and user-friendly features.

One of the standout characteristics of these Kenmore refrigerators is their spacious interior design. With adjustable shelving and crisper drawers, users can customize their storage to accommodate a variety of food items, from large party platters to delicate fruits and vegetables. The sleek layout promotes organization, allowing easy access to all essentials while maximizing available space.

Furthermore, these models are equipped with SmartSense technology, which helps maintain optimal temperatures and humidity levels. This feature is crucial for preserving the freshness of food items for longer periods. By constantly monitoring conditions inside the refrigerator, SmartSense technology adjusts cooling and freezing cycles accordingly, preventing temperature fluctuations that can lead to spoilage.

Another notable feature is the energy-efficient design. Many of these Kenmore refrigerators come with an Energy Star certification, which means they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only contributes to reduced energy bills but also encourages environmentally friendly practices.

Additionally, the models feature a state-of-the-art cooling system that includes a multi-air flow design. This feature ensures even cooling throughout the refrigerator, preventing warm spots and keeping all areas at a consistent temperature. Enhanced filtration systems also work to keep the air inside the refrigerator fresh, reducing odors and maintaining the quality of stored food.

In terms of convenience, the Kenmore refrigerators have user-friendly digital controls that allow for easy temperature adjustments. External ice and water dispensers add to the convenience, providing easy access to chilled water and ice without the need to open the fridge, thus maintaining its internal temperature.

In summary, the Kenmore 795 series stands out with its combination of spacious design, advanced cooling technologies, energy efficiency, and convenient features. These refrigerators are ideal for families and individuals who seek reliable performance coupled with modern conveniences, making them a smart addition to any kitchen.
Top Page Image Contents