Nikon D300s manual Select an option, 360, Shutdown, Clean at startup

2Select an option.

Highlight one of the following options and press J.

n

Option Description

5Clean at startup The image sensor is automatically cleaned each time the camera is turned on.

	Clean at	The image sensor is automatically cleaned
		during shutdown each time the camera is
6 shutdown
		turned off.
7	Clean at startup	The image sensor is cleaned automatically at
	& shutdown	startup and at shutdown.

8Cleaning off Automatic image sensor cleaning off.

DImage Sensor Cleaning

Using camera controls interrupts image sensor cleaning. Image sensor cleaning may not be performed at startup if the flash is on.

Cleaning is performed by vibrating the low-pass filter. If dust can not be fully removed using the options in the Clean image sensor menu, clean

the image sensor manually (0 361) or consult a Nikon-authorized service representative.

If image sensor cleaning is performed several times in succession, image sensor cleaning may be temporarily disabled to protect the camera’s internal circuitry. Cleaning can be performed again after a short wait.

360