Nikon D300s manual Measure white balance, Check the results, 145

4Measure white balance.

Before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. The camera will measure a value for white balance and store it in preset d-0. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus.

5Check the results.

If the camera was able to measure a value for white balance, Cwill flash in the control panel for about six seconds, while the viewfinder will show a flashing a.

If lighting is too dark or too bright, the camera may be unable to measure white balance. A flashing b a will appear in the control panel and viewfinder for about six seconds. Press the shutter-release button halfway to return to Step 4 and measure white balance again.

Control panel

Viewfinder

r

Control panel

Viewfinder

145