Nikon D300s manual 356, Remote, Terminal

	The D300S is equipped with a ten-
	pin remote terminal for remote
	control and automatic
	photography. The terminal is
	provided with a cap, which protects
	the contacts when the terminal is
	not in use. The following
	accessories can be used (all lengths are approximate):
	• Remote Cord MC-22:Remote shutter release with blue, yellow,
	and black terminals for connection to a remote shutter-
	triggering device, allowing control via sound or electronic
	signals (length 1 m/3 ft. 3 in.).
	• Remote Cord MC-30: Remote shutter release; can be used to
	reduce camera shake (length 80 cm/2 ft. 7 in.).
	• Remote Cord MC-36: Remote shutter release; can be used for
	interval timer photography or to reduce camera shake or
Remote	keep the shutter open during a time exposure (length 85
terminal	cm/2 ft. 9 in.).
accessories	• Extension Cord MC-21: Can be connected to ML-3 or MC-series
	20, 22, 23, 25, 30, or 36. Only one MC-21 can be used at a
	time (length 3 m/9 ft. 10 in.).
	• Connecting Cord MC-23: Connects two cameras for
	simultaneous operation (length 40 cm/1 ft. 4 in.).
	• Adapter Cord MC-25: Ten-pin to two-pin adapter cord for
	connection to devices with two-pin terminals, including
	the MW-2 radio control set, MT-2 intervalometer, and ML-2
	modulite control set (length 20 cm/8 in.).
	• GPS Unit GP-1(0 198): Record latitude, longitude, altitude,
	and UTC time with pictures.
	• GPS Adapter Cord MC-35(0 198): Connects GPS devices to
	D300S via PC cable supplied by manufacturer of GPS
	device, allowing GPS data to be recorded with
	photographs (length 35 cm/1 ft. 2 in.).
	• Modulite Remote Control Set ML-3: Allows infrared remote
	control at ranges of up to 8 m (26 ft. 3 in.).

n

356