❚❚Measuring a Value for White Balance

1Light a reference object.

Place a neutral gray or white object under the lighting that will be used in the final photograph. In studio settings, a standard gray panel can be used as a reference object. Note that exposure is automatically increased by 1 EV when measuring white balance; in exposure mode h, adjust exposure so that the exposure indicator shows ±0 (0 113).

2Set white balance to L(Preset manual).

Press the WB button and rotate the main command dial until Lis displayed in the control panel.

Control panel

WB button

Main command dial

r3 Select direct measurement mode.

Release the WB button briefly and then press the button until the L icon in the control panel starts to flash. A flashing Dwill also appear in the control panel and viewfinder. The displays will flash for about six seconds.

Control panel

Viewfinder

144

Page 170
Image 170
Nikon D300s Measuring a Value for White Balance, Light a reference object, Set white balance to LPreset manual, 144