Craftsman 917.28726 owner manual Stopping

Page 11

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments

or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles.

HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

1.Depress brake pedal (B) all the way down and hold.

2.Pull parking brake lever (C) up and hold, release pressure from brake pedal (B), then release parking brake lever. Pedal should remain in brake

position. Make sure parking brake will hold tractor secure.

ENGINE -

•Move throttle control (D) between half

and full speed (fast) position,

NOTE: Failure to move throttle control

between half and full speed (fast) posi-

tion, before stopping, may cause engine to "backfire",

Turn ignition key (F) to "STOP" position and remove key, Always remove key

when leaving tractor to prevent unau- thorized use,

Never use choke (N) to stop engine,

IMPORTANT: Leaving the ignition switch in any position other than "STOP" will cause the battery to discharge and go dead, NOTE: Under certain conditions when tractor is standing idle with the engine run- ning, hot engine exhaust gases may cause "browning" of grass, To eliminate this pos- sibility, always stop engine when stopping tractor on grass areas,

,_ICAUTION: Always stop tractor com- pletely, as described above, before leaving the operator's position,

STOPPING

MOWER BLADES -

•To stop mower blades, move attachment

clutch lever in to disengaged position

(_1_) Attachment (r_) Disengaged

ClutchPosition

Engage Position

GROUND DRIVE -

•To stop ground drive, depress brake pedal all the way down.

TO USE CHOKE CONTROL (N)

Use choke control whenever you are start- ing a cold engine. Do not use to start a warm engine.

To engage choke control, pull knob out. Slowly push knob in to disengage.

TO MOVE FORWARD AND

BACKWARD

The direction and speed of movement is controlled by the forward and reverse drive pedals.

1.Start tractor and release parking brake.

2.Slowly depress forward (K) or reverse

(L)drive pedal to begin movement. Ground speed increases the further

11down the pedal is depressed.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL 60179 U.S.A RrftsmrnYear on Tractor 90=DAYS on BatteryGeneral Operation Safe Handling of Gasoline ServiceII. Slope Operation IV. TowingNot use a nozzle lock-opendevice General ServiceFor prices and additional information call 1=800=827=6655 SPECiFiCATiONSSears Installation Service ProductUnpack Carton Check BatteryAdjust Seat Check Brake System To Drive Tractor OFF SkidCheck Tire Pressure Check Deck Levelness@@@ Attachment Clutch Lever Service Reminder / Hour MeterKnow Your Tractor Stopping To Operate Mower To Adjust Mower Cutting HeightTransmission Engaged Transmission Disengaged Using the Reverse Operation SystemTo Operate on Hills To TransportTo Start Engine Towing Carts and Other Attach MentsBefore Starting the Engine Check Engine OIL Level ADD GasolineRGE TRANSMiSSiON Automatic Transmission Warm UPMowing TiPS General Recommendations MaintenanceSchedule Blade Removal TiresTo Change Engine OIL BeltsLubrication AIR Filter To Remove Mower To Install Mower03042 To Level Mower Precision SIDE-TO-SIDE AdjustmentVisual SIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentTo Replace Mower Drive Belt To Remove CABLES, Reverse Order Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak BAT- Tery Engine To Adjust Carburetor To Adjust Choke ControlCylinders BatteryFuel System Engine OILProblem Cause Correction Operator leaves seat with =ROBLEM Cause CorrectionVibration Into reverseRoblem Cause Correction Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationGarantia Servicio De amputar las manosy los pies y de lanzar Funcionamiento GeneralIV. Remolque III. NiiosPage Responsabilidades DEL Cliente Especificaciones DEL ProductoAPI-SG-SL Desempaque LA Caja DE Carton Ajuste EL AsientoPara Remover EL Tractor LA Caja DE CartonConjunto Revision DE LA Nivelacion DELRemover EL Tractor DE LA Plata Revision DE LA Preskn DE LAS Llantas@@@ Palanca DE Mando Crucero Familiaricese CON SU TractorSU Tractor Palanca DE Control DE MovimienPara Usar EL Control DE LA AOELER- AOI6N D Como Usar SU TractorMiento Parada Cuchillas DE LA SegadoraPara Ajustar LAS Ruedas CALIBRADO- RAS AtrasUtilizar EL Mando Crucero Para Ajustar LA Altura DE Corte DE LA SegadoraPara Transportar Para Operar EN CerrosUsar EL Sistema DE Funcionamiento Atras Agregue Gasolina Meoanismo DE Aviso DE Servicio / CRON6METROAntes DE Hacer Arrancar EL Motor Calentamiento Para LA Transmision Automatica MASArranque CON Tiempo Templado Arranque CON Tiempo FRO 50 Y MenosConsejos Para Segar Antes DE Cada USO Programa DE MantenimientoRecomendaciones Generales Cuidado DE LA Cuohilla LlantasVerifiez Sistema Presencia OPERA- DOR Verifiez Sistema Funcionamiento Atras ROSMotor Lubricacion Enfriamiento DEL TransejeNivel DEL Fluido DE LA Bomba DEL Transeje CorreasPara Darle Servicio AL Cartucho Filtro DE Aceite DEL MotorFiltro DE Aire Para Darle Servicio AL PrefiltroInstale LA Segadora TractorPara Desmontar LA Cortadora DE Cesped Fije LA Pieza DE Union Anterior E Ajuste DE Delante a Atras Para Nivelar LA SegadoraRegulacion Visual DE Lado a Lado LadoMontaje DE LA Correa Montaje DE LA Correa DE Transmision DE LA SegadoraDesmontaje DE LA Correa DAS Delanteras Controlar Y Ajustar EL FrenoControl DEL Freno IMPRESI6N / INCLINACI6N DE LAS RUE=Para Cambiar EL Fusible Para Adjuntar LOS Cables DE EmpalmeReemplazar LA Bateria Para Cambiar LA Bombilla DE LA LUZ DelanteraPara Ajustar EL Carburador MotorPara Ajustar EL Cable DE Control DE LA ACELERACI6N Otros BaterjaAceite DEL Motor CjlindrosCausa IDENTIFICACI6N DE ProblemasProblema Pero noarrancaMa corte=dieparejo ContinuadoCORRECCJ6N Cuando el operadorCausa Correccion 15GRADOSMAX Solamente Ande Cuesta Arriba OSears

917.28726 specifications

The Craftsman 917.28726 is a lawn tractor designed for both residential and light commercial use, making lawn maintenance a breeze. This robust machine is packed with features and technologies that enhance its performance, ease of use, and overall functionality.

One of the standout features of the Craftsman 917.28726 is its powerful engine. Equipped with a reliable 20 HP Briggs & Stratton motor, this tractor provides ample power to tackle tough mowing conditions and challenging terrains. Its automatic transmission allows for smooth acceleration and deceleration, making it ideal for users of all experience levels.

The 917.28726 comes with a 42-inch cutting deck, which is designed to handle medium to large lawns effectively and efficiently. The cutting height can be easily adjusted, providing versatility to manage different grass lengths. This feature ensures a clean and even cut, promoting the health and aesthetics of your lawn.

Another important characteristic of the Craftsman 917.28726 is its user-friendly design. The seat features a comfortable cushioning system and ergonomic armrests, making long mowing sessions much more enjoyable. The easy-to-reach controls are intuitively designed, allowing users to quickly adjust settings without interrupting their mowing rhythm.

Safety is also a priority with the Craftsman 917.28726. It is equipped with a safety switch that prevents operation when the operator is not in the seat, reducing the risk of accidents. Moreover, the tractor's strong build quality, reinforced frame, and reliable braking system provide peace of mind while operating on inclines or uneven surfaces.

The tractor also integrates modern technologies such as a quick-connect deck wash system, which simplifies maintenance and keeps the cutting deck clean for optimal performance. The heavy-duty tires provide excellent traction, ensuring stability on various terrains.

In conclusion, the Craftsman 917.28726 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners and light commercial users. With its durable construction, versatile cutting options, and safety enhancements, this lawn tractor stands out in the market, providing a reliable solution to meet your lawn care needs. Whether you are tackling your backyard or maintaining a larger property, the Craftsman 917.28726 delivers performance and reliability in every cut.
Top Page Image Contents