Craftsman 917.28726 owner manual To Operate Mower, To Adjust Mower Cutting Height

Page 12

TO USE CRUISE CONTROL

The cruise control feature can be used for forward travel only.

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth,straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

,With forward drive pedal (K) depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever (A) determines the cutting height.

•Put attachment lift lever in desired cut-

ting height slot.

,Slide pointer tab (T) to desired cutting height as a reminder for next time you

mow.

The cutting height range is approxi- mately 1" to 4". The heights are mea- sured from the ground to the blade tip with the engine not running. These heights

are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

,The average lawn should be cut to ap- proximately 2-1/2 inches during the cool

season and to over 3 inches during hot months. For healthier and better look-

ing lawns, mow often and after moderate

growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS Gauge wheels are properly adjusted

when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Adjust gauge wheels with tractor on a fiat level surface.

1.Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual).

2.With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appro- priate hole. Tighten securely.

3.Repeat for all, installing gauge wheel in same adjustment hole.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equip- ment on rough, rolling terrain or hills.

1.Select desired height of cut with at- tachment lift lever.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Rrftsmrn SEARS, Roebuck and CO., Hoffman ESTATES, IL 60179 U.S.A90=DAYS on Battery Year on TractorGeneral Operation Service II. Slope OperationIV. Towing Safe Handling of GasolineGeneral Service Not use a nozzle lock-opendeviceSPECiFiCATiONS Sears Installation ServiceProduct For prices and additional information call 1=800=827=6655Check Battery Adjust SeatUnpack Carton To Drive Tractor OFF Skid Check Tire PressureCheck Deck Levelness Check Brake System@@@ Service Reminder / Hour Meter Know Your TractorAttachment Clutch Lever Stopping To Adjust Mower Cutting Height To Operate MowerUsing the Reverse Operation System To Operate on HillsTo Transport Transmission Engaged Transmission DisengagedTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start EngineAutomatic Transmission Warm UP RGE TRANSMiSSiONMowing TiPS Maintenance ScheduleGeneral Recommendations Tires Blade RemovalBelts LubricationTo Change Engine OIL AIR Filter To Install Mower To Remove Mower03042 Precision SIDE-TO-SIDE Adjustment Visual SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment To Level MowerTo Replace Mower Drive Belt Front Wheel TOE-IN/CAMBER To Start Engine with a Weak BAT- TeryTo Remove CABLES, Reverse Order Engine To Adjust Choke Control To Adjust CarburetorBattery Fuel SystemEngine OIL CylindersProblem Cause Correction =ROBLEM Cause Correction VibrationInto reverse Operator leaves seat withRoblem Cause Correction Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXGarantia Servicio Funcionamiento General De amputar las manosy los pies y de lanzarIII. Niios IV. RemolquePage Especificaciones DEL Producto API-SG-SLResponsabilidades DEL Cliente Ajuste EL Asiento Para Remover EL TractorLA Caja DE Carton Desempaque LA Caja DE CartonRevision DE LA Nivelacion DEL Remover EL Tractor DE LA PlataRevision DE LA Preskn DE LAS Llantas Conjunto@@@ Familiaricese CON SU Tractor SU TractorPalanca DE Control DE Movimien Palanca DE Mando CruceroComo Usar SU Tractor MientoParada Cuchillas DE LA Segadora Para Usar EL Control DE LA AOELER- AOI6N DAtras Utilizar EL Mando CruceroPara Ajustar LA Altura DE Corte DE LA Segadora Para Ajustar LAS Ruedas CALIBRADO- RASPara Operar EN Cerros Usar EL Sistema DE Funcionamiento AtrasPara Transportar Meoanismo DE Aviso DE Servicio / CRON6METRO Antes DE Hacer Arrancar EL MotorAgregue Gasolina MAS Arranque CON Tiempo TempladoArranque CON Tiempo FRO 50 Y Menos Calentamiento Para LA Transmision AutomaticaConsejos Para Segar Programa DE Mantenimiento Recomendaciones GeneralesAntes DE Cada USO Llantas Verifiez Sistema Presencia OPERA- DORVerifiez Sistema Funcionamiento Atras ROS Cuidado DE LA CuohillaEnfriamiento DEL Transeje Nivel DEL Fluido DE LA Bomba DEL TransejeCorreas Motor LubricacionFiltro DE Aceite DEL Motor Filtro DE AirePara Darle Servicio AL Prefiltro Para Darle Servicio AL CartuchoTractor Para Desmontar LA Cortadora DE CespedInstale LA Segadora Fije LA Pieza DE Union Anterior E Para Nivelar LA Segadora Regulacion Visual DE Lado a LadoLado Ajuste DE Delante a AtrasMontaje DE LA Correa DE Transmision DE LA Segadora Desmontaje DE LA CorreaMontaje DE LA Correa Controlar Y Ajustar EL Freno Control DEL FrenoIMPRESI6N / INCLINACI6N DE LAS RUE= DAS DelanterasPara Adjuntar LOS Cables DE Empalme Reemplazar LA BateriaPara Cambiar LA Bombilla DE LA LUZ Delantera Para Cambiar EL FusibleMotor Para Ajustar EL Cable DE Control DE LA ACELERACI6NPara Ajustar EL Carburador Baterja Aceite DEL MotorCjlindros OtrosIDENTIFICACI6N DE Problemas ProblemaPero noarranca CausaContinuado CORRECCJ6NCuando el operador Ma corte=dieparejoCausa Correccion Solamente Ande Cuesta Arriba O 15GRADOSMAXSears

917.28726 specifications

The Craftsman 917.28726 is a lawn tractor designed for both residential and light commercial use, making lawn maintenance a breeze. This robust machine is packed with features and technologies that enhance its performance, ease of use, and overall functionality.

One of the standout features of the Craftsman 917.28726 is its powerful engine. Equipped with a reliable 20 HP Briggs & Stratton motor, this tractor provides ample power to tackle tough mowing conditions and challenging terrains. Its automatic transmission allows for smooth acceleration and deceleration, making it ideal for users of all experience levels.

The 917.28726 comes with a 42-inch cutting deck, which is designed to handle medium to large lawns effectively and efficiently. The cutting height can be easily adjusted, providing versatility to manage different grass lengths. This feature ensures a clean and even cut, promoting the health and aesthetics of your lawn.

Another important characteristic of the Craftsman 917.28726 is its user-friendly design. The seat features a comfortable cushioning system and ergonomic armrests, making long mowing sessions much more enjoyable. The easy-to-reach controls are intuitively designed, allowing users to quickly adjust settings without interrupting their mowing rhythm.

Safety is also a priority with the Craftsman 917.28726. It is equipped with a safety switch that prevents operation when the operator is not in the seat, reducing the risk of accidents. Moreover, the tractor's strong build quality, reinforced frame, and reliable braking system provide peace of mind while operating on inclines or uneven surfaces.

The tractor also integrates modern technologies such as a quick-connect deck wash system, which simplifies maintenance and keeps the cutting deck clean for optimal performance. The heavy-duty tires provide excellent traction, ensuring stability on various terrains.

In conclusion, the Craftsman 917.28726 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners and light commercial users. With its durable construction, versatile cutting options, and safety enhancements, this lawn tractor stands out in the market, providing a reliable solution to meet your lawn care needs. Whether you are tackling your backyard or maintaining a larger property, the Craftsman 917.28726 delivers performance and reliability in every cut.
Top Page Image Contents