Craftsman 917.28726 owner manual To Install Mower, To Remove Mower

Page 21

VICEWARNING:OR ADJUSTMENTS:TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER=

1.Depress brake pedal fully and set parking brake.

2, Place attachment clutch in "DISENGAGED" position.

3.Turn ignition key to "STOP" and remove key.

4.Make sure the blades and all moving parts have completely stopped.

5.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

1.Place attachment clutch in "DISEN- GAGED" position.

2.Lower attachment lift lever to its lowest position.

3.Roll belt off engine pulley (M).

4.Remove retainer spring (K), slide collar

(L)off and push housing guide (P) out of bracket.

5.Remove clutch cable spring (Q) from idler arm (R).

6.Disconnect front link (E) from mower

-remove retainer spring and washer.

7.Go to either side of mower and discon- nect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

8.Go to other side of mower and discon-

nect the suspension arm and rear lift link.

_, CAUTION: After rear lift links are dis-

connected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever.

9.Slide mower out from under right side of tractor.

IMPORTANT: If an attachment other than the mower is to be mounted on the tractor, remove the front link (E) and rear lift liks

(C) from tractor and hook the clutch spring

(Q)into the cable guide on front edge of lower dash.

TO INSTALL MOWER

Be sure tractor is on level surface and

engage parking brake.

1. Lower attachment lift lever to it'slowest position.

_i, CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position.

NOTE: Be sure mower side suspension arms (A) are pointing forward before slid- ing mower under tractor.

2.Slide mower under tractor until it is centered under tractor.

3.ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring.

4.Repeat on opposite side of tractor.

03042

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL 60179 U.S.A RrftsmrnYear on Tractor 90=DAYS on BatteryGeneral Operation II. Slope Operation ServiceIV. Towing Safe Handling of GasolineNot use a nozzle lock-opendevice General ServiceSears Installation Service SPECiFiCATiONSProduct For prices and additional information call 1=800=827=6655Check Battery Adjust SeatUnpack Carton Check Tire Pressure To Drive Tractor OFF SkidCheck Deck Levelness Check Brake System@@@ Service Reminder / Hour Meter Know Your TractorAttachment Clutch Lever Stopping To Operate Mower To Adjust Mower Cutting HeightTo Operate on Hills Using the Reverse Operation SystemTo Transport Transmission Engaged Transmission DisengagedBefore Starting the Engine Check Engine OIL Level Towing Carts and Other Attach MentsADD Gasoline To Start EngineRGE TRANSMiSSiON Automatic Transmission Warm UPMowing TiPS Maintenance ScheduleGeneral Recommendations Blade Removal TiresBelts LubricationTo Change Engine OIL AIR Filter To Remove Mower To Install Mower03042 Visual SIDE-TO-SIDE Adjustment Precision SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment To Level MowerTo Replace Mower Drive Belt Front Wheel TOE-IN/CAMBER To Start Engine with a Weak BAT- TeryTo Remove CABLES, Reverse Order Engine To Adjust Carburetor To Adjust Choke ControlFuel System BatteryEngine OIL CylindersProblem Cause Correction Vibration =ROBLEM Cause CorrectionInto reverse Operator leaves seat withRoblem Cause Correction Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationGarantia Servicio De amputar las manosy los pies y de lanzar Funcionamiento GeneralIV. Remolque III. NiiosPage Especificaciones DEL Producto API-SG-SLResponsabilidades DEL Cliente Para Remover EL Tractor Ajuste EL AsientoLA Caja DE Carton Desempaque LA Caja DE CartonRemover EL Tractor DE LA Plata Revision DE LA Nivelacion DELRevision DE LA Preskn DE LAS Llantas Conjunto@@@ SU Tractor Familiaricese CON SU TractorPalanca DE Control DE Movimien Palanca DE Mando CruceroMiento Como Usar SU TractorParada Cuchillas DE LA Segadora Para Usar EL Control DE LA AOELER- AOI6N DUtilizar EL Mando Crucero AtrasPara Ajustar LA Altura DE Corte DE LA Segadora Para Ajustar LAS Ruedas CALIBRADO- RASPara Operar EN Cerros Usar EL Sistema DE Funcionamiento AtrasPara Transportar Meoanismo DE Aviso DE Servicio / CRON6METRO Antes DE Hacer Arrancar EL MotorAgregue Gasolina Arranque CON Tiempo Templado MASArranque CON Tiempo FRO 50 Y Menos Calentamiento Para LA Transmision AutomaticaConsejos Para Segar Programa DE Mantenimiento Recomendaciones GeneralesAntes DE Cada USO Verifiez Sistema Presencia OPERA- DOR LlantasVerifiez Sistema Funcionamiento Atras ROS Cuidado DE LA CuohillaNivel DEL Fluido DE LA Bomba DEL Transeje Enfriamiento DEL TransejeCorreas Motor LubricacionFiltro DE Aire Filtro DE Aceite DEL MotorPara Darle Servicio AL Prefiltro Para Darle Servicio AL CartuchoTractor Para Desmontar LA Cortadora DE CespedInstale LA Segadora Fije LA Pieza DE Union Anterior E Regulacion Visual DE Lado a Lado Para Nivelar LA SegadoraLado Ajuste DE Delante a AtrasMontaje DE LA Correa DE Transmision DE LA Segadora Desmontaje DE LA CorreaMontaje DE LA Correa Control DEL Freno Controlar Y Ajustar EL FrenoIMPRESI6N / INCLINACI6N DE LAS RUE= DAS DelanterasReemplazar LA Bateria Para Adjuntar LOS Cables DE EmpalmePara Cambiar LA Bombilla DE LA LUZ Delantera Para Cambiar EL FusibleMotor Para Ajustar EL Cable DE Control DE LA ACELERACI6NPara Ajustar EL Carburador Aceite DEL Motor BaterjaCjlindros OtrosProblema IDENTIFICACI6N DE ProblemasPero noarranca CausaCORRECCJ6N ContinuadoCuando el operador Ma corte=dieparejoCausa Correccion 15GRADOSMAX Solamente Ande Cuesta Arriba OSears

917.28726 specifications

The Craftsman 917.28726 is a lawn tractor designed for both residential and light commercial use, making lawn maintenance a breeze. This robust machine is packed with features and technologies that enhance its performance, ease of use, and overall functionality.

One of the standout features of the Craftsman 917.28726 is its powerful engine. Equipped with a reliable 20 HP Briggs & Stratton motor, this tractor provides ample power to tackle tough mowing conditions and challenging terrains. Its automatic transmission allows for smooth acceleration and deceleration, making it ideal for users of all experience levels.

The 917.28726 comes with a 42-inch cutting deck, which is designed to handle medium to large lawns effectively and efficiently. The cutting height can be easily adjusted, providing versatility to manage different grass lengths. This feature ensures a clean and even cut, promoting the health and aesthetics of your lawn.

Another important characteristic of the Craftsman 917.28726 is its user-friendly design. The seat features a comfortable cushioning system and ergonomic armrests, making long mowing sessions much more enjoyable. The easy-to-reach controls are intuitively designed, allowing users to quickly adjust settings without interrupting their mowing rhythm.

Safety is also a priority with the Craftsman 917.28726. It is equipped with a safety switch that prevents operation when the operator is not in the seat, reducing the risk of accidents. Moreover, the tractor's strong build quality, reinforced frame, and reliable braking system provide peace of mind while operating on inclines or uneven surfaces.

The tractor also integrates modern technologies such as a quick-connect deck wash system, which simplifies maintenance and keeps the cutting deck clean for optimal performance. The heavy-duty tires provide excellent traction, ensuring stability on various terrains.

In conclusion, the Craftsman 917.28726 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners and light commercial users. With its durable construction, versatile cutting options, and safety enhancements, this lawn tractor stands out in the market, providing a reliable solution to meet your lawn care needs. Whether you are tackling your backyard or maintaining a larger property, the Craftsman 917.28726 delivers performance and reliability in every cut.
Top Page Image Contents