Craftsman 917.28726 To Drive Tractor OFF Skid, Check Tire Pressure, Check Deck Levelness

Page 8

4.Rolltractor forward off skid.

5.Removebanding holdingthe deflector shield up againsttractor.

TO DRIVE TRACTOR OFF SKID

(See Operation section for location

and function of controls)

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Place freewheel control in "trans- mission engaged" position (see "TO

TRANSPORT" in Operation section of this manual).

4.Sit on seat in operating position, de-

press brake pedal and set the parking brake.

5.Raise attachment lift lever to its highest position.

6.Remove key from bag and start the engine (see "TO START ENGINE" in the Operation section of this manual). After engine has started, move throttle control to idle (slow) position.

7.Release parking brake.

8.Slowly depress forward drive pedal and drive tractor off skid.

9.Apply brake to stop tractor and set parking brake.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated

at the factory for shipping purposes. Cor- rect tire pressure is important for best cutting performance.

,Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower hous-

ing should be properly leveled. See "TO LEVEL MOWER" in the Service and

Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is operat- ing properly. See "TO CHECK BRAKE"

in the Service and Adjustments section of this manual.

,/CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best

performance and satisfaction from this Quality Product.

Please review the following checklist:

¢" All assembly instructions have been completed.

v" No remaining loose parts in carton. v" Battery is properly prepared and

charged.

v" Seat is adjusted comfortably and tight- ened securely.

v" All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).

v" Be sure mower deck is properly leveled

side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated

for leveling).

v" Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

V" Check wiring. See that all connections are still secure and wires are properly clamped.

v" Before driving tractor, be sure freewheel

control is in "transmission engaged"

position (see "TO TRANSPORT" in the Operation section of this manual).

While learning how to use your tractor, pay extra attention to the following important items:

v" Engine oil is at proper level.

v" Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.

v" Become familiar with all controls, their

location and function. Operate them before you start the engine.

¢" Be sure brake system is in safe operat- ing condition.

v" Be sure Operator Presence System and Reverse Operation System (ROS)

are working properly (See the Opera-

tion and Maintenance sections in this

manual).

¢" It is important to purge the transmission before operating your tractor for the first time. Follow proper starting and transmis-

sion purging instructions (See "TO START ENGINE" and "PURGE TRANSMISSION"

in the Operation section of this manual).

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Rrftsmrn SEARS, Roebuck and CO., Hoffman ESTATES, IL 60179 U.S.A90=DAYS on Battery Year on TractorGeneral Operation Service II. Slope OperationIV. Towing Safe Handling of GasolineGeneral Service Not use a nozzle lock-opendeviceSPECiFiCATiONS Sears Installation ServiceProduct For prices and additional information call 1=800=827=6655Unpack Carton Check BatteryAdjust Seat To Drive Tractor OFF Skid Check Tire PressureCheck Deck Levelness Check Brake System@@@ Attachment Clutch Lever Service Reminder / Hour MeterKnow Your Tractor Stopping To Adjust Mower Cutting Height To Operate MowerUsing the Reverse Operation System To Operate on HillsTo Transport Transmission Engaged Transmission DisengagedTowing Carts and Other Attach Ments Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start EngineAutomatic Transmission Warm UP RGE TRANSMiSSiONMowing TiPS General Recommendations MaintenanceSchedule Tires Blade RemovalTo Change Engine OIL BeltsLubrication AIR Filter To Install Mower To Remove Mower03042 Precision SIDE-TO-SIDE Adjustment Visual SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment To Level MowerTo Replace Mower Drive Belt To Remove CABLES, Reverse Order Front Wheel TOE-IN/CAMBERTo Start Engine with a Weak BAT- Tery Engine To Adjust Choke Control To Adjust CarburetorBattery Fuel SystemEngine OIL CylindersProblem Cause Correction =ROBLEM Cause Correction VibrationInto reverse Operator leaves seat withRoblem Cause Correction Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXGarantia Servicio Funcionamiento General De amputar las manosy los pies y de lanzarIII. Niios IV. RemolquePage Responsabilidades DEL Cliente Especificaciones DEL ProductoAPI-SG-SL Ajuste EL Asiento Para Remover EL TractorLA Caja DE Carton Desempaque LA Caja DE CartonRevision DE LA Nivelacion DEL Remover EL Tractor DE LA PlataRevision DE LA Preskn DE LAS Llantas Conjunto@@@ Familiaricese CON SU Tractor SU TractorPalanca DE Control DE Movimien Palanca DE Mando CruceroComo Usar SU Tractor MientoParada Cuchillas DE LA Segadora Para Usar EL Control DE LA AOELER- AOI6N DAtras Utilizar EL Mando CruceroPara Ajustar LA Altura DE Corte DE LA Segadora Para Ajustar LAS Ruedas CALIBRADO- RASPara Transportar Para Operar EN CerrosUsar EL Sistema DE Funcionamiento Atras Agregue Gasolina Meoanismo DE Aviso DE Servicio / CRON6METROAntes DE Hacer Arrancar EL Motor MAS Arranque CON Tiempo TempladoArranque CON Tiempo FRO 50 Y Menos Calentamiento Para LA Transmision AutomaticaConsejos Para Segar Antes DE Cada USO Programa DE MantenimientoRecomendaciones Generales Llantas Verifiez Sistema Presencia OPERA- DORVerifiez Sistema Funcionamiento Atras ROS Cuidado DE LA CuohillaEnfriamiento DEL Transeje Nivel DEL Fluido DE LA Bomba DEL TransejeCorreas Motor LubricacionFiltro DE Aceite DEL Motor Filtro DE AirePara Darle Servicio AL Prefiltro Para Darle Servicio AL CartuchoInstale LA Segadora TractorPara Desmontar LA Cortadora DE Cesped Fije LA Pieza DE Union Anterior E Para Nivelar LA Segadora Regulacion Visual DE Lado a LadoLado Ajuste DE Delante a AtrasMontaje DE LA Correa Montaje DE LA Correa DE Transmision DE LA SegadoraDesmontaje DE LA Correa Controlar Y Ajustar EL Freno Control DEL FrenoIMPRESI6N / INCLINACI6N DE LAS RUE= DAS DelanterasPara Adjuntar LOS Cables DE Empalme Reemplazar LA BateriaPara Cambiar LA Bombilla DE LA LUZ Delantera Para Cambiar EL FusiblePara Ajustar EL Carburador MotorPara Ajustar EL Cable DE Control DE LA ACELERACI6N Baterja Aceite DEL MotorCjlindros OtrosIDENTIFICACI6N DE Problemas ProblemaPero noarranca CausaContinuado CORRECCJ6NCuando el operador Ma corte=dieparejoCausa Correccion Solamente Ande Cuesta Arriba O 15GRADOSMAXSears

917.28726 specifications

The Craftsman 917.28726 is a lawn tractor designed for both residential and light commercial use, making lawn maintenance a breeze. This robust machine is packed with features and technologies that enhance its performance, ease of use, and overall functionality.

One of the standout features of the Craftsman 917.28726 is its powerful engine. Equipped with a reliable 20 HP Briggs & Stratton motor, this tractor provides ample power to tackle tough mowing conditions and challenging terrains. Its automatic transmission allows for smooth acceleration and deceleration, making it ideal for users of all experience levels.

The 917.28726 comes with a 42-inch cutting deck, which is designed to handle medium to large lawns effectively and efficiently. The cutting height can be easily adjusted, providing versatility to manage different grass lengths. This feature ensures a clean and even cut, promoting the health and aesthetics of your lawn.

Another important characteristic of the Craftsman 917.28726 is its user-friendly design. The seat features a comfortable cushioning system and ergonomic armrests, making long mowing sessions much more enjoyable. The easy-to-reach controls are intuitively designed, allowing users to quickly adjust settings without interrupting their mowing rhythm.

Safety is also a priority with the Craftsman 917.28726. It is equipped with a safety switch that prevents operation when the operator is not in the seat, reducing the risk of accidents. Moreover, the tractor's strong build quality, reinforced frame, and reliable braking system provide peace of mind while operating on inclines or uneven surfaces.

The tractor also integrates modern technologies such as a quick-connect deck wash system, which simplifies maintenance and keeps the cutting deck clean for optimal performance. The heavy-duty tires provide excellent traction, ensuring stability on various terrains.

In conclusion, the Craftsman 917.28726 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners and light commercial users. With its durable construction, versatile cutting options, and safety enhancements, this lawn tractor stands out in the market, providing a reliable solution to meet your lawn care needs. Whether you are tackling your backyard or maintaining a larger property, the Craftsman 917.28726 delivers performance and reliability in every cut.
Top Page Image Contents