Craftsman 917.28726 Using the Reverse Operation System, To Operate on Hills, To Transport

Page 13

_IbCAUTION: Do not operate the mower without either the entire grass catcher,

on mowers so equipped, or the deflector shield (S) in place.

REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direc- tion with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

Ai_WARNING: Backing up with the at- tachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

1.Depress brake pedal all the way down.

2.With engine running, turn ignition key counterclockwise to ROS "ON" posi- tion.

3.Look down and behind before and while backing.

4.Slowly depress reverse drive pedal to start movement.

5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" Position Engine "ON" Position (Normal Operating)

TO OPERATE ON HILLS

Aid.WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual.

,Choose the slowest speed before start- ing up or down hills.

,Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

,Slowly depress appropriate drive pedal to slowest setting.

,Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be

sure to disengage transmission by placing

freewheel control in freewheeling position. Freewheel control is located at the rear drawbar of tractor.

1.Raise attachment lift lever to its highest position.

2.Pull freewheel control out and into the slot and release so it is held in the

disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To re-engage transmission, reverse above procedure.

Transmission Engaged

Transmission Disengaged

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL 60179 U.S.A RrftsmrnYear on Tractor 90=DAYS on BatteryGeneral Operation II. Slope Operation ServiceIV. Towing Safe Handling of GasolineNot use a nozzle lock-opendevice General ServiceSears Installation Service SPECiFiCATiONSProduct For prices and additional information call 1=800=827=6655Adjust Seat Check BatteryUnpack Carton Check Tire Pressure To Drive Tractor OFF SkidCheck Deck Levelness Check Brake System@@@ Know Your Tractor Service Reminder / Hour MeterAttachment Clutch Lever Stopping To Operate Mower To Adjust Mower Cutting HeightTo Operate on Hills Using the Reverse Operation SystemTo Transport Transmission Engaged Transmission DisengagedBefore Starting the Engine Check Engine OIL Level Towing Carts and Other Attach MentsADD Gasoline To Start EngineRGE TRANSMiSSiON Automatic Transmission Warm UPMowing TiPS Schedule MaintenanceGeneral Recommendations Blade Removal TiresLubrication BeltsTo Change Engine OIL AIR Filter To Remove Mower To Install Mower03042 Visual SIDE-TO-SIDE Adjustment Precision SIDE-TO-SIDE AdjustmentFRONT-TO-BACK Adjustment To Level MowerTo Replace Mower Drive Belt To Start Engine with a Weak BAT- Tery Front Wheel TOE-IN/CAMBERTo Remove CABLES, Reverse Order Engine To Adjust Carburetor To Adjust Choke ControlFuel System BatteryEngine OIL CylindersProblem Cause Correction Vibration =ROBLEM Cause CorrectionInto reverse Operator leaves seat withRoblem Cause Correction Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationGarantia Servicio De amputar las manosy los pies y de lanzar Funcionamiento GeneralIV. Remolque III. NiiosPage API-SG-SL Especificaciones DEL ProductoResponsabilidades DEL Cliente Para Remover EL Tractor Ajuste EL AsientoLA Caja DE Carton Desempaque LA Caja DE CartonRemover EL Tractor DE LA Plata Revision DE LA Nivelacion DELRevision DE LA Preskn DE LAS Llantas Conjunto@@@ SU Tractor Familiaricese CON SU TractorPalanca DE Control DE Movimien Palanca DE Mando CruceroMiento Como Usar SU TractorParada Cuchillas DE LA Segadora Para Usar EL Control DE LA AOELER- AOI6N DUtilizar EL Mando Crucero AtrasPara Ajustar LA Altura DE Corte DE LA Segadora Para Ajustar LAS Ruedas CALIBRADO- RASUsar EL Sistema DE Funcionamiento Atras Para Operar EN CerrosPara Transportar Antes DE Hacer Arrancar EL Motor Meoanismo DE Aviso DE Servicio / CRON6METROAgregue Gasolina Arranque CON Tiempo Templado MASArranque CON Tiempo FRO 50 Y Menos Calentamiento Para LA Transmision AutomaticaConsejos Para Segar Recomendaciones Generales Programa DE MantenimientoAntes DE Cada USO Verifiez Sistema Presencia OPERA- DOR LlantasVerifiez Sistema Funcionamiento Atras ROS Cuidado DE LA CuohillaNivel DEL Fluido DE LA Bomba DEL Transeje Enfriamiento DEL TransejeCorreas Motor LubricacionFiltro DE Aire Filtro DE Aceite DEL MotorPara Darle Servicio AL Prefiltro Para Darle Servicio AL CartuchoPara Desmontar LA Cortadora DE Cesped TractorInstale LA Segadora Fije LA Pieza DE Union Anterior E Regulacion Visual DE Lado a Lado Para Nivelar LA SegadoraLado Ajuste DE Delante a AtrasDesmontaje DE LA Correa Montaje DE LA Correa DE Transmision DE LA SegadoraMontaje DE LA Correa Control DEL Freno Controlar Y Ajustar EL FrenoIMPRESI6N / INCLINACI6N DE LAS RUE= DAS DelanterasReemplazar LA Bateria Para Adjuntar LOS Cables DE EmpalmePara Cambiar LA Bombilla DE LA LUZ Delantera Para Cambiar EL FusiblePara Ajustar EL Cable DE Control DE LA ACELERACI6N MotorPara Ajustar EL Carburador Aceite DEL Motor BaterjaCjlindros OtrosProblema IDENTIFICACI6N DE ProblemasPero noarranca CausaCORRECCJ6N ContinuadoCuando el operador Ma corte=dieparejoCausa Correccion 15GRADOSMAX Solamente Ande Cuesta Arriba OSears

917.28726 specifications

The Craftsman 917.28726 is a lawn tractor designed for both residential and light commercial use, making lawn maintenance a breeze. This robust machine is packed with features and technologies that enhance its performance, ease of use, and overall functionality.

One of the standout features of the Craftsman 917.28726 is its powerful engine. Equipped with a reliable 20 HP Briggs & Stratton motor, this tractor provides ample power to tackle tough mowing conditions and challenging terrains. Its automatic transmission allows for smooth acceleration and deceleration, making it ideal for users of all experience levels.

The 917.28726 comes with a 42-inch cutting deck, which is designed to handle medium to large lawns effectively and efficiently. The cutting height can be easily adjusted, providing versatility to manage different grass lengths. This feature ensures a clean and even cut, promoting the health and aesthetics of your lawn.

Another important characteristic of the Craftsman 917.28726 is its user-friendly design. The seat features a comfortable cushioning system and ergonomic armrests, making long mowing sessions much more enjoyable. The easy-to-reach controls are intuitively designed, allowing users to quickly adjust settings without interrupting their mowing rhythm.

Safety is also a priority with the Craftsman 917.28726. It is equipped with a safety switch that prevents operation when the operator is not in the seat, reducing the risk of accidents. Moreover, the tractor's strong build quality, reinforced frame, and reliable braking system provide peace of mind while operating on inclines or uneven surfaces.

The tractor also integrates modern technologies such as a quick-connect deck wash system, which simplifies maintenance and keeps the cutting deck clean for optimal performance. The heavy-duty tires provide excellent traction, ensuring stability on various terrains.

In conclusion, the Craftsman 917.28726 combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners and light commercial users. With its durable construction, versatile cutting options, and safety enhancements, this lawn tractor stands out in the market, providing a reliable solution to meet your lawn care needs. Whether you are tackling your backyard or maintaining a larger property, the Craftsman 917.28726 delivers performance and reliability in every cut.
Top Page Image Contents