Craftsman 917.275283 owner manual AIR Filter

Page 19

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year.

AIR FILTER

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every

100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

1.Loosen knob and remove cover.

TO SERVICE PRE-CLEANER

2.Slide foam pre-cleaner off cartridge.

3.Wash it in liquid detergent and water.

4.Squeeze it dry in a clean cloth. Allow it to dry.

5.Saturate it in engine oil. Wrap it in clean, absorbent cloth and squeeze to remove excess oil.

TO SERVICE CARTRIDGE

Replace a dirty, bent, or damaged car- tridge.

NOTE: Do not wash the paper cartridge or use pressurized air, as this will damage the cartridge.

1.Remove nut and cartridge plate.

2.Reinstall the pre-cleaner (cleaned and oiled) over the paper cartridge.

3.Check rubber seal for damage and proper position around stud. Replace if necessary.

4.Reassemble air cleaner, cartridge plate, and nut.

5.Reinstall air cleaner cover and secure by tightening knob.

Cartridge

Foam

Pre-Cleaner

Cartridge

CLEAN AIR INTAKE/COOLING AREAS

To insure proper cooling, make sure the grass screen, cooling fins, and other exter- nal surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cool- ing shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could cre- ate a fire hazard and/or damage.

SPARK PLUG(S)

Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes

clogged, obstructing fuel flow to carbu- retor, replacement is required.

1.With engine cool, remove filter and plug fuel line sections.

2.Place new fuel filter in position in fuel line with arrow pointing towards carbu- retor.

3.Be sure there are no fuel line leaks and clamps are properly positioned.

4.Immediately wipe up any spilled gaso- line.

Fuel

Knob'

Rubber

Seat

Nut

CLEANING

• Clean engine, battery, seat, finish, etc.

 

of

all foreign

matter.

Keep finished

surfaces and wheels free

 

of

all gasoline, oil, etc.

Protect painted surfaces with auto-

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stub- born dried gum fibers.

motive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed

air or a leaf blower to remove grass, leaves and trash from tractor and mower.

19

Image 19
Contents NFTZMnNl Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation General OperationDo not IV. ServiceAbove 32F SAE 5W-30 Below 32F Product SpecificationsGallons Unleaded TypeAgreements Sears Installation ServiceCustomer Responsibilities Repair ProtectionUnpack Carton HOW to SET UP Your TractorCheck Battery To Remove Tractor fromCheck Brake System Check Deck LevelnessChecktire Pressure Check for Proper Position of ALL BeltsH L I.,I Know Your Tractor To USE Choke Control HOW to USE Your TractorTo SET Parking Brake EngineTo Stop Mower Blades To Operate MowerTo Operate on Hills To Start Engine Transmission En Transmission DisengagedBefore Starting the Engine Check Engine OIL Level ADD GasolineAutomatictransmissionwarmup Mowing Tips Before Each USE General RecommendationsLubricate Blade Care BatteryEngine TransaxlecoolingTransaxle Pump Fluid BeltsAIR Filter Tractor To Remove Mower To Install MowerLower mower to its lowest position SIDE-TO-SIDE Adjustment with Bubble Level To Level Mower HousingAlternate SIDE-TO-SIDE Adjustment Method To Replace Mower Drive Belt Mower Drive Belt InstallationMower Drive Belt Removal Remove Mower Drive Belt Install NEW Mower Blade Secondary Drive BeltReinstall Mower Drive Belt To Replace Mower Blade SEC Ondary Drive BeltTo Check and Adjust Brake To Adjust Attachment ClutchTo Replace Motion Drive Belt To Start Engine with a Weak BAT- Tery Transmission Removal ReplacementFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Replace Headlight Lamp Replacing BatteryTo Remove Hood and Grill AS- Sembly Preliminary Setting To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorAcceleration Test Engine OIL EngineRemove mower from tractor for winter Fuel SystemProblem Troubleshooting ChartCause Correction To run when ExcessiveVibration Engine ContinuesProblem Cause Correction =FR , .,,, LECTR,CCLUT Tractor -- Model Number SchematicTractor -- Model Number Electrical KEY Part Description Tractor -- Model Number 917.275283 Chassis and Enclosures J13oKEY Part Description Tractor -- Model Number Ground Drive KEY Part NO. NO.DESCRIPTION Tractor -- Model Number Steering 47\KEY Part Description Engine Tractor -- Model NumberLiftVgt Tractor -- Model Number Lift AssemblyTractor -- Model Number Seat Assembly Tractor Model Number Decals Wheels and TiresTractor -- Model Number Mower Deck Inches 1 inch = ¢,0 125THK Tractor -- Model Number TRANSAXLE-MODEL Number\31 fJ HEAD/VALVE/BREATHER Crankcase KEY Part NO. no IGNITION/ELECTRICAL Blower Housing and Baffles IGNITION/ELECTRICAL Starting System J Engine Controls J Starting System OIL PAN/LUBRICATION KEY Part Description Exhaust J Crankshaft KEY Part Description Page Suggested Guide for Sighting Slopes for Safe Operation Get it fixed, at your home or ourst

917.275283 specifications

The Craftsman 917.275283 is a premium lawn tractor designed for homeowners seeking a reliable and efficient machine for maintaining their lawns. Built with a robust structure and advanced engineering, this lawn tractor offers a perfect blend of performance, comfort, and user-friendly features.

At the heart of the Craftsman 917.275283 is a powerful 24 HP Briggs & Stratton engine that ensures ample power for mowing, mulching, and hauling tasks. This engine is coupled with a hydrostatic transmission, providing smooth and effortless speed control while driving on various terrains. Operators can easily adjust their speed without the need for shifting gears, making it an ideal choice for those looking for convenience during their mowing sessions.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This deck is designed to provide a wide cutting path, effectively reducing the number of passes needed to cover a lawn. The cutting height is adjustable, allowing users to customize the grass height according to their preference, resulting in a healthier and more aesthetically pleasing lawn. Additionally, the deck is crafted for easy cleaning, ensuring that maintenance is straightforward.

The Craftsman 917.275283 also incorporates advanced technology for enhanced mowing precision. The onboard SmartCut technology automatically adjusts the engine speed based on the grass thickness, allowing for optimal cutting efficiency. This feature not only improves performance but also extends engine life by reducing strain during operation.

Comfort is a key aspect of any lawn care equipment, and Craftsman does not disappoint. The tractor features an ergonomic seat with ample padding, ensuring a comfortable ride even during extended mowing sessions. The easy-to-reach controls are designed to prevent fatigue, allowing users to focus on their mowing tasks.

Safety features are also integrated into the design of the Craftsman 917.275283. The tractor comes equipped with a safety key, ensuring that the engine cannot be started while in gear. This is a critical feature that provides peace of mind, especially for those with children or pets nearby.

In summary, the Craftsman 917.275283 stands out in the market of lawn tractors with its powerful engine, user-friendly hydrostatic transmission, and advanced cutting technologies. Coupled with a comfortable design and essential safety features, this machine is tailored to meet the needs of homeowners looking to achieve a perfectly manicured lawn with ease and efficiency.